JMP Wish List

kmonteleone

What inspired this wish list request? I have some convoluted formulas that I'm stuggling to keep straight and I don't want to make my column names longer than they already are. I want to remember what I was working on when I come back to it in a few days. I'll often put some comments in the source script (or just a blank script) and wanted to do the same. What is the improvement you would like to see? When you comment in a column the comments are dropped. Can we keep them? Why is this idea important? It'll allow me to come back to previous work with a better idea of what I've done. Sometimes it can feel like I need to start from 0 if I can't exactly remember where I was. And other people will have more clues when looking at one of my files.

iKnowVeryLittle · ‎09-18-2024

What inspired this wish list request? Part of my job is analyzing data from OQ/PQ validations for injection molding. We utilize control charts to assess stability and capability of CTQ dimensions per cavity. The information i need for this is the control chart, histogram with spec limits, capability summary, and assessment of normality. The legacy control chart i like the best because it includes a normal quantile plot and allows for preference control for shading zones and tests. The new IMR chart does not have preference control or normality test so i need to combine information from other sources which is messy and time consuming. What is the improvement you would like to see? I would like to the see two items. First, the capabilities of the legacy control charts preference settings for the new control charts as the legacy will be discontinued in JMP 19. Second, there should be a selection to view the normal quantile plot on the histogram and/or the goodness of fit tests (anderson/darling or shapiro-wilk). Why is this idea important? It is imperative that your data is normal when assessing capability. Including normal quantile plot or the anderson-darling/shapiro-wilk test will provide supporting evidence in a single area. The preference control will help make analysis quicker. Certain items arent necessary to show and deselecting them everytime is time consuming.

r40135 · ‎06-20-2024

What inspired this wish list request? Unlike other statistical software (Minitab), it seems that JMP doesn't provide detailed formulas for analyses. This lack of details and transparency can make it difficult for users to understand the underlying calculations. What is the improvement you would like to see? Provide more formulas for analyses where it makes sense to include them in the support documentation and in cases where formulas are quite complex, simplified formulas for simplified examples so the user can understand the concept. Why is this idea important? understand the underlying calculations, it is quite often to get request to explain the analysis, how do you derive this conclusion and what kind of analysis and fundamental concept formulas are being used in the analysis.

ConfidenceBee27 · ‎06-19-2024

What inspired this wish list request? When comparing designs/improvements during accelerated testing, the goal is to compress timing (hence accelerate) but not change the failure mode. Taking Weibull statistics, one aims to shorten the 'time' or eta while maintaining the 'slope' or beta. Weibull ++ software did this chart by showing a confidence region (say 95%) or map in a eta vs. beta plot. What is the improvement you would like to see? Enable ability to plot eta vs. beta in the reliability platform. Why is this idea important? This is the most visual way to see the effect of accelerated testing and avoid pitfalls.

thomasz · ‎06-02-2024

According to the manual, the variable clustering colormap should be as described here: Color Map on Correlations "The variables are arranged in the order in which they are listed in the Cluster Members table." But unfortunately, the sort order in the map is first, by cluster, and then by variable name. The cluster members table on the other hand, is sorted by Cluster and then by RSquare with Own Cluster. This has been the case, at least since JMP 16, and it has caused some confusion, especially since axis labels are not shown on the plot, and there is no easy way to add them in the platform. I would like that: 1. The order in the color map is as described, i.e. by cluster and by RSquare with own cluster as in the cluster members table. 2. An option to add Axis labels to the color map so that the color map can be used in presentations. The axis labels should show both the cluster number and the variable name. It is important because currently, the plot is being misinterpreted and it is not possible to use it in a presentation without axis labels.

francoisbourlon · ‎02-22-2024

MShroff · ‎06-06-2023

Hello, When porting the output data from Matched Pairs to a (combined) data table, the various parameters are split into multiple columns. This makes the data cumbersome to use. It would be preferable for the various parameters (Mean Difference, DF, t-ratio, Prob > |t|, etc.) to be put into separate columns (with the appropriate column headers). Alternatively, they should be tabulated as stacked, with the headers in a Label column and values in a Data column. Once the data is available in one way or the other, it can be handled more easily. With the current approach, it's neither here nor there. Regards Mehul Shroff

CasualUsers · ‎04-28-2023

What inspired this wish list request? What is the improvement you would like to see? Why is this idea important?

mansaNoob · ‎04-22-2023

What inspired this wish list request? I parse a default environment with a jsl script in each of my scripts. Currently there is no concept of an autoexec style jsl script that can be automatically parsed before all jsl scripts to setup the environment. What is the improvement you would like to see? Allow an autoexec style jsl file that is automatically parsed before all jsl scripts. It can potentially live in %appdata% folder for the installed version and may even be an extension of jmpKeywords.jsl. Why is this idea important? It will reduce the load for those of us who will use it to setup the environment (variables etc.). It will be benign to those who choose not to use it.

MShroff · ‎04-14-2023

Hello, I would like to request a function to be added to the Rows menu to delete duplicate rows based on a matching cell except for the first (or selected) one. Currently, one has to first select matching cells, unselect the first occurence, and then delete the remaining. In a large dataset with several unique sets of duplicates, this can be extremely cumbersome. Thanks and regards Mehul Shroff

Lichun · ‎04-06-2023

What inspired this wish list request? I got a lot of support from JMP team, especially from Jed. I would like to suggest JMP to support control chart to embedded in the email with alarm script directly. What is the improvement you would like to see? Currently the email alarm script not support the chart embedded in the email, alarm script support the substitue, QC test, attached file. However, we would like to have chart to show in email directly to make people easy to read the email. Why is this idea important? For the SPC alarm that we would people to aware of the QC item/ QC device/ QC lot immediately instead of people need to open the file. With the purpose of user friendly, I hope JMP can consider to have this function to embedded control chart directly in email. Thanks.

MShroff · ‎02-28-2023

Hello, The set of calculators available in Help -> Sample Index does not include a calculator for hypothesis testing of 1 variance or std deviation. Can this be added? Thank you. Regards Mehul Shroff

devarts · ‎02-28-2023

What inspired this wish list request? What is the improvement you would like to see? Why is this idea important?

ceebee · ‎01-23-2023

What inspired this wish list request? We are trying to generate multiple graphs using the wrapping function, but the axes only show up on the outer edges of the graph. What is the improvement you would like to see? Would like the ability to add x/y axes to all of the graphs within the wrapped graph (see figure) Why is this idea important?

MShroff · ‎12-16-2022

Hello, I would like to request the option to arrange Variability Gauge charts in rows, similar to other platforms such as Distribution, Fit Y by X, etc. Regards Mehul Shroff

jthi · ‎12-13-2022

I cannot use JSL Debugger as (I think) it has some issue with my VPN (or my VPN has issue with it). When I accidentally run debugger it will completely freeze my JMP for few minutes. I would like to have an option to completely disable JLS debugger, make it response faster with an error or maybe we could figure out why it freezes and won't work. First error message I receive is: "A time-out encountered while attempting to connect to the JSL Debugger GUI."

Hyunsik · ‎11-15-2022

JMP's equivalence test, subcategory of nonlinear fitting with sigmoid curves - logistic curves - logistic 4p using log transformed concentration data, is a fantastic tool for comparison two drugs in bioassay. Result contains four parameters (growth rate, Inflection point, lower asymptote, and upper asymptote). In some cases, a higher variability with the lower asymptote ratio can be observed due to the large impact of small variations in the ratios of reference and test sample. To overcome this potential drawback, Yang et al. suggest not considering the lower asymptote alone, but together with the upper asymptote as the ratio of upper to lower asymptote (e.g. New Variable=(upper asymptote - Lower asymptote)ref / (upper asymptote - lower asymptote)test). For detailed information, please see the article, Comment and Completion: Implementation of Parallelism Testing for Four-Parameter Logistic Model in Bioassays, DOI:10.5731/pdajpst.2015.01060 They suggested two new parameters. First one is the range from lower to upper asymptote and second is the slope (or growth factor) at inflection point. I think their idea is quite reasonable and hopefully I could apply their concept in JMP. Thank you.

hogi · ‎10-18-2022

☐ cool new feature ☐ could help many users! ☐ removes a „bug“ ☑ nice to have ☐ nobody needs it my wish: possibility to deactivate Formula evaluation for all formulas in a column group via right click context menu of the column group. more wishes submitted by

vhuac · ‎10-12-2022

Every day we have new data that need to add/update to the existing data table I need a simple operation that will be able to concatenate new row(s) and/or new column(s) to the existing table and also update the existing table if the new table show a change in the data value by matching columns criteria.

BHarris · ‎10-01-2022

Consider adding an "Arrows" drop zone under "Size" which would allow the user to drag dy (and optionally dx) fields to it, and JMP would draw arrows from the points with lengths set by the dy and dx values. Gnuplot has something like this which is incredibly handy in some situations: https://www.google.com/search?q=gnuplot+vector+fields&tbm=isch&safe=active

JMP Wish List

Keep Comments in Columns

Control Charts - Normality Testing / Goodness of Fit

provide detailed formulas for analyses

beta vs. eta chart

Color map on correlations in the right order and with labels

Graph builder: set error bars on both X and Y axis

Matched Pairs - Output Data

standard least squares regression in Graph Builder

Autoexecute style jsl

Delete Duplicate Rows Based on Matching Cells

Send the chart with alarm script directly

Calculator for hypothesis test for 1 variance / std dev

Local Filter Attached to Published Report

Extra Axis in graph builder

Variability Gauge - Arrange in Rows

Add preference to disable JSL Debugger completely

Adding more options for 4PL equivalence test

column group: deactivate formula eval

Join, Concat and Update

Add vector fields to Graph Builder