JMP Knowledge Base

Latest Posts

• JMP® Clinical 7.0 produces errors "This file could not be saved with the given name" and "Unable to save file" when trying to save a review

  In JMP® Clinical 7.0, if a review that has been previously saved is open in Review Builder, and the user also opens it in Review Viewer, making changes to the review in Review Builder and trying to save it results in the following errors: "This file could not be saved with the given name." "Unable to save file." This error is resolved in the JMP® Clinical 7.0.1 hotfix (link below).   JMP® Clinical...

  sseligman

  JMP Knowledge Base |

  Dec 22, 2022 12:09 PM

  307 views | 0 replies

• JMP® Clinical 7.0 produces an error when ARM variable is missing and multiple TRT0xA or TRT0xP variables exist

  When an ARM variable does not exist but TRT0xA or TRT0xP variables do exist, distribution reports produce the following error: could not find column in access or evaluation of 'Column' , Column/*###*/("Trt") Selecting TRT01A or TRT01P as the treatment variable to use also produces the error. If you add ARM to the data set or select ARM as the comparator to use, no error occurs. This error is commo...

  sseligman

  JMP Knowledge Base |

  Dec 22, 2022 11:42 AM

  383 views | 0 replies

• JMP® Clinical 7.0 can crash when adding a study or refreshing study metadata

  When attempting to add a study or refresh study metadata, JMP® Clinical can crash. The crash might be due to specification of a Universal Naming Convention (UNC) path, which uses double slashes or backslashes to precede the name of the computer.  Go to the Settings tab, then click on the Manage Configurations button to examine the path settings. If <userLocal> or /user/clinical/output contains a U...

  sseligman

  JMP Knowledge Base |

  Dec 22, 2022 11:39 AM

  355 views | 0 replies

• Error when converting dates to character dates in JMP® Clinical 7.1

  In JMP^® Clinical 7.1 when the AE dataset is loaded and ASTDT and/or AENDT are converted to AESTDTC and/or AEENDTC, the length is not long enough, and all values of the character dates are incorrect. This issue is resolved in the hot fix found here. If you encounter this problem and if the study was previously added with JMP^® Clinical 7.1 before installing the hot fix in this note, you will need to...

  laura_archer

  JMP Knowledge Base |

  Dec 22, 2022 9:40 AM

  356 views | 0 replies

• Error in the Patient Profile in JMP® Clinical 6.1

  This Hotfix allows the Patient Profile to better support character findings in the profile graphic display and in the domain tables.  Additionally, new options in the Patient Profile allow horizontal or vertical orientation of findings taken across timepoints.  To use these changes, apply the Hot fix found here.   [Previously JMP Note 60236]

  laura_archer

  JMP Knowledge Base |

  Dec 22, 2022 9:37 AM

  299 views | 0 replies

• Enhancements to JMP® Clinical 7.1

  The following is a list of enhancements to JMP Clinical 7.1, found in the JMP Clinical 7.1.1 hot fix. Adverse Event Narrative: Use CMCAT/MHCAT to determine the subset of CM/MH records to use: 
  
  For the ByNarrativeCategoryDetails template, the following has been added:
  
  For prior and concomitant medications, JMP Clinical looks to see if CMCAT = "PRIOR AND CONCOMITANT MEDICATIONS" exists as a category i...

  laura_archer

  JMP Knowledge Base |

  Dec 22, 2022 7:54 AM

  465 views | 0 replies

• DMSUPP population flags are no longer picked up in metadata for Dialog Population options

  DMSUPP population flags no longer picked up in metadata for Dialog Population options.  This hot fix resolves this issue.  Due to a differentiation of &ADSLVARS to have &ADSLSUPPVars this hot fix updates the Add/Manage Study mechanism to include flags found in DMSUPP.   After the hot fix is applied the study metadata needs to be refreshed. The  hot fix is found here.     [Previously JMP Note 61810...

  laura_archer

  JMP Knowledge Base |

  Dec 22, 2022 7:52 AM

  307 views | 0 replies

• DM Distribution cannot be run when SUPPDM missing IDVAR and IDVARVAL

  DM Distribution returns an error when a SUPPDM domain is present but does not contain IDVAR and IVARVAL.  No error is returned if the variables exist but are empty.  The hotfix found here resolves this error.   [Previously JMP Note 61809]

  laura_archer

  JMP Knowledge Base |

  Dec 22, 2022 7:50 AM

  332 views | 0 replies

• Changing report options in JMP® Clinical 6.1 are not honored until the report is rerun

  JMP® Clinical 6.1 reviews might show incorrect report options. When an option on a report in JMP Clinical 6.1 is changed and the report is not rerun, the review is saved with incorrect report options which do not match the results. To resolve the problem, apply the Hotfix found here.   [Previously JMP Note 60235]

  laura_archer

  JMP Knowledge Base |

  Dec 22, 2022 7:48 AM

  292 views | 0 replies

• ByNarrativeCategoryDetails template incorrectly states con meds=none

  In JMP^® Clinical 7.1 an AE narrative using the template ByNarrativeCategoryDetails might result in incorrect output where Concomitant Medications are "None" for ALL AEs. This issue is resolved in the JMP^® Clinical 7.1.1 hot fix. To resolve the problem, apply the hot fix found here.   [Previously JMP Note 65318]

  laura_archer

  JMP Knowledge Base |

  Dec 22, 2022 7:46 AM

  421 views | 0 replies

• An Adverse Events Distribution in JMP® Clinical 8.0 might result in an error when calculating relative risk

  In JMP Clinical 8.0, an Adverse Events Distribution might result in the following error when calculating relative risk: ERROR: More positional parameters found than defined. This error can occur when values in the data contain commas. Click here to access the hot fix for this issue.   [Previously JMP Note 67905]

  laura_archer

  JMP Knowledge Base |

  Dec 22, 2022 7:44 AM

  421 views | 0 replies

• An Adverse Event Narrative in JMP® Clinical 8.0 might be missing information about dates from ADaM data sets

  An Adverse Event Narrative that is created in JMP Clinical 8.0 might not display some dates correctly when you are using Analysis Data Model (ADaM) data sets with ASTDTM and AENDTM. Although there are dates in the data sets, the Adverse Event Narrative does not have the appropriate sentences that reflect the treatment dates. These statements are missing from the output.   Click here to access the ...

  laura_archer

  JMP Knowledge Base |

  Dec 22, 2022 7:42 AM

  442 views | 0 replies

• A Medical Query Risk Report in JMP® Clinical 8.0 does not honor colors set in value colors

  In JMP Clinical 8.0, the Medical Query Risk Report does not honor colors that are set in value colors.  Click here to access the hot fix for this issue.   [Previously JMP Note 67923]

  laura_archer

  JMP Knowledge Base |

  Dec 22, 2022 7:40 AM

  421 views | 0 replies

• Alignment of column names is incorrect in standard safety reports in JMP® Clinical 8.0

  In JMP Clinical 8.0, the column names in a standard safety report after the first column are not aligned with the data.  Click here to access the hot fix for this issue.   [Previously JMP Note 67864]

  laura_archer

  JMP Knowledge Base |

  Dec 22, 2022 7:39 AM

  394 views | 0 replies

• What to do if you launch JMP Clinical® but the JMP Clinical Main Window does not appear

  If you launch JMP Clinical^® and see only the JMP Home Window but not the JMP Clinical Main Window, you may need to re-enable the Clinical and Life Sciences Add-Ins. To do this, select View ► Add-Ins. Find Clinical and Life Sciences and check the "Enabled" box for each. This should restore the JMP Clinical Main Window.   [Previously JMP Note 59379]

  AdamMorris

  JMP Knowledge Base |

  Dec 22, 2022 7:32 AM

  423 views | 0 replies

• The Outcross Linkage Map Analyses Add-in for JMP® Genomics

  The Outcross Linkage Map Analyses Add-in for JMP^® Genomics supports Linkage Mapping and QTL analyses for outcrossed lines. These analyses are conducted using the Onemap R package. This Add-in includes a OneMap Import/Export Engine, as well as Linkage Groups and Recombination, Linkage Map Order, and Build QTL Genotype Probability Data Set procedures for Outcross data. The results of these processes...

  AdamMorris

  JMP Knowledge Base |

  Dec 22, 2022 7:31 AM

  563 views | 0 replies

• A JMP® Genomics 10.2 hot fix adds new features for the Basic Genetics Workflow process and Cross Evaluation process

  This hot fix is intended for users of JMP^® Genomics 10.0. After the hot fix is applied, the Basic Genetics Workflow process now enables input data containing Non-delimited Genotypes, "/"-delimited Genotypes, or Numeric Genotypes. Also, the Cross Evaluation process now includes the following capabilities: Specifying multiple parents in the backcross analysisComputing a similarity measure between pr...

  AdamMorris

  JMP Knowledge Base |

  Dec 22, 2022 7:26 AM

  555 views | 0 replies

• JMP® Genomics New Features and Release Notes

  JMP^® Genomics 10.1 (available here) Release Notes for JMP Genomics 10.1   JMP^® Genomics 10.0 Release Notes for JMP Genomics 10.0   JMP^® Genomics 9.1 Release Notes for JMP Genomics 9.1   JMP^® Genomics 9.0 Release Notes for JMP Genomics 9.0   [Previously JMP Note 67656]

  AdamMorris

  JMP Knowledge Base |

  Dec 22, 2022 7:20 AM

  619 views | 0 replies

• JMP Genomics 9.0 and JMP Clinical 7.0 versions do not include the Excel Add-in for JMP

  JMP Genomics 9.0 and JMP Clinical 7.0 do not include the Excel Add-in for JMP. Instead, Excel data files can be opened directly in JMP or imported using JMP's Excel Import Wizard. JMP Genomics additionally offers a Text/CSV/Excel Input Engine, for importing single or multiple Excel data files.   [Previously JMP Note 64246]

  AdamMorris

  JMP Knowledge Base |

  Dec 22, 2022 7:14 AM

  347 views | 0 replies

• How to Insert Unicode Characters into JMP® Reports

  Many JMP^® users like to include special characters in their reports, most commonly subscripts and superscripts. However, you can insert any Unicode character into many parts of your JMP reports manually (i.e., without scripting). The process for inserting Unicode characters on Windows is not obvious. You can copy and paste them from the Character Map on your OS, but you must first set your font co...

  AdamMorris

  JMP Knowledge Base |

  Dec 22, 2022 7:12 AM

  1625 views | 0 replies

• How is the Loading Matrix scaled in Principal Components Analysis in JMP®?

  In JMP^®, when calculating principal components "On Correlations", the input variables are centered and scaled. Loadings are calculated by multiplying the eigenvectors by the square root of their eigenvalues.   When calculating principal components "On Covariances", the input variables are centered only. Loadings are calculated by multiplying the eigenvectors by the square root of their eigenvalues...

  AdamMorris

  JMP Knowledge Base |

  Dec 22, 2022 7:11 AM

  1236 views | 0 replies

• The LSMeans Plot may be incorrect in JMP® 14

  In JMP® 14.0, the LSMeans Plots in the Fit Model platform might be incorrect for three-way (or higher order) interaction terms. The values in the LSMeans table are correct.  Therefore, a workaround for this problem is to create the plots manually from that table. This problem has been fixed in the JMP 14.3 maintenance update.         [Previously JMP Note 64389]

  AdamMorris

  JMP Knowledge Base |

  Dec 22, 2022 7:10 AM

  322 views | 0 replies

• Error When Connecting to Google Sheets: "Access blocked: JMP's request is invalid"

  Background
  
  Beginning October 3, 2022, Google changed how Google Sheets are accessed. This change disrupted JMP’s ability to access Google Sheets using the Google Sheets Internet Open option. Accessing JMP will result in the following error message: We expect this functionality to be restored in a future version of JMP. Google Sheets Internet Open in JMP is normally performed by selecting File > I...

  Dave_Matthews

  JMP Knowledge Base |

  Dec 22, 2022 6:13 AM

  1688 views | 0 replies

• JMP Installation Support for JMP® Presentation Virtualization (PV) and JMP® for the Cloud Versions

  JMP® Presentation Virtualization (PV) or JMP® for the Cloud licenses cover the legacy PV agreements and the new JMP for the Cloud packaging. The level of support and what is supported remain the same.   A JMP Presentation Virtualization license grants organizations the right to install JMP on a Windows Server operating system and allow licensed users to connect to the server using Remote Desktop P...

  Dave_Matthews

  JMP Knowledge Base |

  Dec 22, 2022 6:12 AM

  2688 views | 0 replies

• How is the standard deviation calculated for the different moving average control charts in JMP®?

  EWMA and UWMA Charts The estimate for σ is
  where N is the number of subgroups for which n_i≥2, s_i is the standard deviation of the i ^th subgroup
  and
  
  Here denotes the gamma function and denotes the i ^th subgroup mean. A subgroup standard deviation s_i is included in the claculation only if n_i≥2. If the observations are normally distributed, then the expected value of s_i is c₄(n_i)σ. Thus, is the...

  sseligman

  JMP Knowledge Base |

  Dec 21, 2022 6:25 AM

  1040 views | 0 replies