JMP Wish List

I would like to have possibility to use similar visualization as PowerBI provides with Ribbon Chart which is quite close to ordered stacked bar chart with some visualization between different bars (easier to see changes over x-axis than cluster bar charts). Some links regarding the PowerBI version Create ribbon charts in Power BI (learn.microsoft.com) and Ribbon Chart is the Next Generation of Stacked Column Chart (radacad.com) .   Below is an example using JMP's Failures sample data: JMP stacked bar chart: JMP with lines:   JMP stacked bar chart with lines: JMP stacked area chart: JMP data split and parallel plot with columns set as Ordinal: JMP split data with lines:   PowerBI stacked bar chart: PowerBI ribbon chart with connectors set invisible (ordered stacked bar chart):   PowerBI ribbon chart:   Out of these I prefer Ribbon chart as it clearly shows if ordering has changed in x-axis (it also has quite useful tooltips which shows the change).  I tried to find what name that chart usually has and I came across Bump Chart, area bump chart, alluvial diagram and sankey bump chart. Bump chart and alluvial seem to be quite different but I think they are also visualizations that could have their place JMP's Graph Builder. ... View more

☑ cool new feature ☑ could help many users! ☐ removes a „bug“ ☐ nice to have ☐ nobody needs it   #myTop10_2022   If a user changes the name of a column, references to the column in table scrips are (sometimes) automatically corrected, references in user scrips unfortunately not: Column() vs As Column() vs datable:column vs dt:As name("column")    So, column name changes are very dangerous: there is always the risk that a jsl code doesn't work anymore after the change - like illustrated in the example below. JMP detects that a noc-existing column is requested and throws an error:   My wish: Instead of throwing an error, JMP could open a window and provide a list of column names. Then the user can select a replacement column. There should also be a toggle box, allowing the user to decide if the JSL code should be automatically adjusted wit the new column name. The new behaviour could be enabled/disabled in the preferences menu such that users which got used to error message still have the choice to get it.     NamesDefaultToHere(1); dt = Open("$SAMPLE_DATA/Big Class.JMP"); Data Table( "Big Class" ):age << Set Name( "age_" ); s = dt << runScript("Distribution"); // column names automatcally adjusted wait(2); s = dt << runScript("Set Age Value Labels"); // this script throws an error   more wishes submitted by   ... View more

☐ cool new feature ☐ could help many users! ☐ removes a „bug“ ☑ nice to have ☐ nobody needs it     It would be great to have the opportunity to trigger the evaluation of a formula with "suppress eval" just "once":   Formulas using  "selected()" or "excluded()" are very useful to highlight selected data or to remove excluded data from lists, calculations and displays. On the other hand, when working with large data sets, the usage of such formulas leads to many waiting times - because any change of the row state triggers a re-evaluation of the formulas.   A compromise: default option for such formula: suppress eval and an option to trigger the formula evaluation just once, e.g. via right click context menu of the "+" formula sign. related wish: https://community.jmp.com/t5/JMP-Wish-List/fast-way-to-enable-disable-formula-calculations/idi-p/547118  (to enable and disable "suppress eval")   more wishes submitted by   ... View more

☐ cool new feature ☐ could help many users! ☐ removes a „bug“ ☑ nice to have ☐ nobody needs it     Enabling the option "conditional" makes a data filter extremely user friendly. By consecutive selection of items in the filter lists, the user defines a hierarchical order how filters react on each other. The selection in the fist filter determines the subset that is displayed in the next filter and so on ...   There are some limitations which could be fixed in a future release of jmp: - conditional data filters are not possible for columns with propery multiple response: https://community.jmp.com/t5/Discussions/Data-Filter-you-have-to-choose-between-quot-conditional-quot-amp/m-p/555435/highlight/true#M76974  - same for text filters: https://community.jmp.com/t5/Discussions/Data-Filter-you-have-to-choose-between-quot-conditional-quot-amp/m-p/556116/highlight/true#M77008 - with the option "conditional" enabled, multiple data filter groups are not possible  https://community.jmp.com/t5/Discussions/Data-Filter-you-have-to-choose-between-quot-conditional-quot-amp/m-p/555435/highlight/true#M76974    more wishes submitted by   ... View more

Following an analysis e.g. linear regression I often use the "make into data table" function.  The output table changes the data from it's original format e.g. from "Numeric" and "Continuous" to "Character" and "Nominal".  It also renames sometimes e.g. from "Concentration" to "Group".  This means, in order to create new analyses from these tables I have to manual change the titles and data formats back to their original settings.  Can we make it so that data formats and column names are retained from the original data table? JMP 16.1.0   Example: Original Column settings: Analyze > Specialized Modelling > Fit Curve Fit Curve > Polynomials > Linear Inhibitor Concentration is now “Group” Make Data Table I want to plot Slope vs Inhibitor Concentration but the column is “Group” and the Data and Modelling Type is no longer correct.   ... View more

Too many times I have accidentally closed a window/analysis then 2 seconds later realized I wasn't quite done with it.  Yes, I could use recall to redo it quickly, but would really like to be able to press a button and restore the last thing I closed.  ... View more

Please consider adding an upper confidence interval for the standard deviation to the variance component analysis output in the Fit Model platform.  Guidance in ICH Q14 contains acceptance criteria related to the Upper 95% confidence interval of the intermediate precision of during assay validation.    Currently, the variance, 95% CI of the variance and the standard deviation (point estimate) are calculated.  The variance from the VCA is used outside of JMP to manually calculate the intermediate precision value (upper CI of the standard deviation).    ... View more

I feel the attributes gauge analysis platform needs improvements to increase visualization aspects of the reports and to make the report tables easier to understand. The version I am using is JMP Pro 16. The first point involves comparing agreements between two raters on whether a part is non-conforming or not. JMP's report produces a Gauge Attribute Chart showing on which part there was an agreement or not. The only agreement table provided is  which doesn't show the breakdown by each rater. That requires generating a Tabulate report shown below which I feel should be included in the report. Equally important would be to show the data visually using a graph like the one created in Graph Builder shown below.   When dealing with a comparison to a standard by raters, there is an additional feature not mentioned in the JMP Documentation. To get an effectiveness chart requires unchecking agreement choices in the Attribute Gauge red hotspot and selecting all the effectiveness choices to get the useful graph below.   I feel the effectiveness report tables on misclassification to a standard are a bit confusing.  See below. I suggest that the table below is much easier to understand.  In addition, the table is much easier to comprehend using the graph shown below.   For further examples of the ideas discussed, please see my On-Demand presentation for the 2022 JMP Discovery Summit: https://community.jmp.com/t5/Discovery-Summit-Americas-2022/Drones-Flying-in-Warehouses-An-Application-of-Attribute-Gauge/ta-p/505599     ... View more

This "problem" was presented today at JMP Scripting Users Group meeting Q3_2022.   Add option to extend Graph Builders legend to each page when Page is being used. I know this can be done by using By when launching Graph Builder from launcher but using Page is much much more flexible than using By especially if you have to make any changes to graph builder.   Below are some options on how to handle this:   Names Default To Here(1); dt = Open("$SAMPLE_DATA/Probe.jmp"); // Use XPatH() and Picture Box with legend gb = dt << Graph Builder( Show Control Panel(0), Size(500, 9760), Variables(X(:DELW_NEMIT), Y(:DELL_RPNBR), Page(:Wafer Number), Color(:Process)), Elements(Points(X, Y, Legend(5))) ); lg = (gb << XPath("//LegendBox"))[1]; lg_pic = lg << get picture; fbs = (gb << XPath("//FrameBox")) << parent; Remove From(fbs, 1); // first one already has "real" legend //margins will need to be adjusted depending on GB size fbs << append(Picture Box(lg_pic, << Margin(Left((gb << get size)[1]-130), Top(-15), Right(0), Bottom(0)))); // Loop over groups one by one while using Where() nw = New Window("GBs", lub = Lineup Box(N Col(1)); ); Summarize(dt, pages = by(:Wafer Number)); For Each({page}, pages, gb_page_expr = Expr( Eval(EvalExpr(gb = dt << Graph Builder( Show Control Panel(0), Size(500, 500), Variables(X(:DELW_NEMIT), Y(:DELL_RPNBR), Color(:Process), Group X(:Wafer Number)), Elements(Points(X, Y, Legend(5))), Where(:Wafer Number == Expr(page)) ))); ); lub << Append(gb_page_expr); // gb << Title(""); ); ((lub << Top Parent) << XPath("//TextBox[contains(text(), 'Where(:')]")) << Visibility("Collapse"); // most likely best idea, use By() gbs = Graph Builder( Size(534, 456), Show Control Panel(0), Variables(X(:DELW_NEMIT), Y(:DELL_RPNBR), Color(:Process)), Elements(Points(X, Y, Legend(1))), By(:Wafer Number) ); Write();     ... View more

I am currently using JMP 16 and use the graph builder to group data for reporting and presentations.  When the data is subgrouped in the Group Y or Group X axes, the font size and type is locked.  This makes it difficult to read when reporting.   Thank you, JasonD ... View more

I would like to suggest the ability to click on the heat map legend when "discrete colors" is clicked on the gradient setting.  So in the picture below when I clikced on the bin between -20 and -30 that data would be selected.     Thanks for considering this.   Steve   ... View more

☐ cool new feature ☑ could help many users! ☑ removes a „bug“ ☐ nice to have ☐ nobody needs it #myTop10_2022   Short: get rid of all this white space !!!     Long: With nominal values on the x axis and X group activated, the axes of the sub-plots share a common list of values. All plots show all values.   In the example below, X group says that girls are in the left plot and boys are in the right plot. But due to axis sharing between both subplots, boys and girls show up on the axes of both plots. This is counter-intuitive and consumes unnecessary space. With some steps the underlying data table can be changed to generate a plot with girls just on the left and boys on the right: https://community.jmp.com/t5/Discussions/X-group-gt-adjust-axis/m-p/542262   Would be great to have a right click option to directly "disentangle" the axis settings such that each axis gets (just) its own values.   similar topics: - same effect for y axis values and Y group - different axis scaling for continuous values in different sub-plots.   example: Plot with male and female students. Unfortunately, the plot on the left (F!) lists also all the  male students - and the plot on the right (M!) all the female students !??!     more wishes submitted by   ... View more

Add a hot spot with appearance options to the Defect Profiler, similar to other profiler, at least: - arrange in rows - legend position - reorder X variable ... View more

In medical research the outcome under study is frequently rare, so the data are highly unbalanced. The model perfomance can significnatly improofed by correction for inbalancing by over- or undersampling. Therefore, I would suggets that all prediction model platforms should have the inbalanced classification option. Even better, the Model screening platform should have the inbalanced classification option included.   Regards,   Lu ... View more

Exactly the same line up box we have now, except that we fix the number of rows and let the number of columns adjust based from data input.   It will be populated per column. I.e, Fill 1st column first from top to bottom, then create 2nd column and fill from top to bottom, repeat added all elements. ... View more

I know there is an add-in for the "Fit Model" platform, but it's not always the easiest to use. It would be quite easy just to add Cohen's d to the output of "Fit Y by X," and this would be quite useful. ... View more

The Power and Sample Size Explorer is lacking an option for tolerance intervals. It is often desirable to get a minimum sample size for a tolerance interval based on the desired margin of error and its probability. Faulkenberry-Weeks is such an approach. Find inspiration in what Minitab does: Methods and formulas for Sample Size for Tolerance Intervals - Minitab ... View more

Hi! Currently, JMP allow to save the DTM formula, but the response is given in a array. It would be very nice if JMP propose to save the DTM formula in columns, in the same format than 'Save Document Term Matrix'. This will be very useful when a model is fitted to predict a class and you want to extend/update the database frequently in order to predict the class of the new lines. Best regards,   ... View more

I have tried to use different state handlers JMP provides, but the more I use them the more I notice issues with them. There are many reasons why I would like to use them and maybe even more reasons for me to avoid them. Biggest issue is usually that they seem to trigger too many times and value returned is not that helpful.   Subscribe To Data Table List() is fairly good example on how most of these should work. You can add different functions to different events (sometimes it is a hassle though). You can imagine how well Subscribe To Data Table List() would work if it would trigger every time something happens to data table list (add, remove, rename) and it would return only data table name for example (or number of data tables changed...) and nothing more.   Below are some problems and suggestions: Hover Label Problem Seems to get triggered when you move close to the point you want to hover over. This causes multiple triggers and slows down JMP unnecessarily and sometimes this slow-down is quite big. Also triggers immediately when you hover over point -> if you move mouse fast over multiple elements it will trigger multiple times. Also triggers multiple times on hover over (could be related to all of the things mentioned earlier) Suggestions Make it more accurate when hover label triggers. Add possibility for "delay" when to trigger event, for example I would like to be able to trigger hover label after user has hovered over same element for 0.2s. Also allow selection of "safe-zone" to determine when hover label should even trigger.   Row State Handler Problem Triggers too many times and all events. Has a bug where you remove row, the row state handler seems to get removed. Suggestions Most likely would be enough if there was a way to capture only specific row state changes (and fix the bug).   Filter State Handler Problem Triggers too many times. One example is that if you even look at the filter the state handler will trigger. Suggestions Remove unnecessary triggers from Filter State Handler or give possibility to choose which states should trigger which function.   Scheduler Problem Can have only one scheduler at the time and you cannot hide the scheduler window. Suggestions Allow creation of private schedulers (currently I hide the window and hope that user won't close it) and multiple different schedulers at the same time. ... View more