JMP User Community

Latest Discussions

Calculating Day 1 Baseline

Hi I have a Result for Day 1 for some subjects. For each subject, I would like to use this as a baseline and subtract it from subsequent days.I can calculate the baseline if I sort the table on Day (see the screenshot), but this is not a solution, as I need to be able to sort the table on other fields. How can I calculate the Day 1 Baseline result for each subject and still be able to sort as I ne...
DNicholls

Discussions |
Nov 1, 2018 10:43 PM

5676 views | 4 replies
JSL - script to select range of points in a graph

Hi,Does JMP have something similar to a Local Data Filter - script in, option for the rectangular select tool on plots?Basically I would like to have a "range slider" control for selecting and highlighting an area on the graph (bunch of points on the plot), without deleting the others. (Very similar to what you would do manually by using the Lasso or a rectangular area select on the plot) The loc...
gokulaka

Discussions |
Nov 1, 2018 3:40 PM

4833 views | 2 replies
Looking for the column number?

Hi there, I am trying to display all the SPSS names of the columns as I can select in the column info (see below). Is that possible? Other question: I want to access a specific cell given the specific columnnumber and rownumber. How can I do that? Thank you. (right-klick on column name>column info)
thebilly31

Discussions |
Nov 1, 2018 2:18 PM

6486 views | 4 replies
Save as CSV File - unclear instructions

I am trying to save a subset of a table which is in sav format into a csv file. Under this link I got clear instructions. However, my JMP14 does not have the option to select a type list to save in. What can I do?
thebilly31

Discussions |
Nov 1, 2018 11:14 AM

10689 views | 5 replies
Percent

Hi, I have a col with values "yes" and "no". Also I have a col of unquie LotNames. How can I find the total percentage of yes for a lotname. I know the logic, just dont know how to do it in JMP. Logic: Percent of yes = Number of "yes" groupby LotName/ Total Rows grouped by LotName Thank you,Rami
rshehadah

Discussions |
Oct 31, 2018 7:00 AM

9755 views | 2 replies

Previous
Next

Latest Discussions

Calculating Day 1 Baseline

Hi I have a Result for Day 1 for some subjects. For each subject, I would like to use this as a baseline and subtract it from subsequent days.I can calculate the baseline if I sort the table on Day (see the screenshot), but this is not a solution, as I need to be able to sort the table on other fields. How can I calculate the Day 1 Baseline result for each subject and still be able to sort as I ne...
DNicholls

Discussions |
Nov 1, 2018 10:43 PM

5676 views | 4 replies
Colored Bars in Tabulate Chart

Is there a way (I am hoping via scripting) that will allow me to color the bars in the chart of a tabulate window. Also, is there way to get rid of the red dots in the background. This chart is a much nicer way of displaying some data, but it is not very customizable.Tabulate Chart
mann

Discussions |
Oct 30, 2018 1:05 PM

7006 views | 8 replies
Blocking in JMP

I have a set of data where I want to perform a three-way ANOVA in JMP. My experiment has three factors (A, B, C) with response (Y). Each factor has two levels (-1, 1) and two replicates are run. I used "Analyze" -> "Fit Model" and select "Full Factorial" to obtain my three-factor ANOVA. However, I am trying to perform a second test where I block the replicates. How would I go about doing this? Wou...
kwyl22

Discussions |
Oct 30, 2018 3:54 AM

13311 views | 4 replies
I cannot find test median

I study one mean tutorial. Actually before we do one mean test. We should check whether our data is normal or not. If normal ==> Mean testIf not normal ==> Median testAccording to candy data from tutorial, it is not normal from first picture below. Then we should go to median test instead of mean test. This is what I learn many years ago from my big customer. At that time may be JMP 3 or JMP 5At t...
ThoYala

Discussions |
Oct 30, 2018 2:38 AM

5512 views | 3 replies
Contingency table and mosaic plot are not same orientation

// For a contingency table report, swap the x and y // currently can swap the mosaic plot only Names Default to Here(1); dt = Open( "$SAMPLE_DATA/Big Class.jmp" ); myr = Contingency( Y( :Age ), X( :sex ) ); // Have to have a Contingency Analysis report open // Can add test to make sure it is open in the future myr = Current Report(); // taking apart CrossTabBox was easier using XML than JSL...
Vball247

Discussions |
Oct 29, 2018 2:18 PM

3253 views | 0 replies

Previous
Next

Latest Discussions

Contingency table and mosaic plot are not same orientation

// For a contingency table report, swap the x and y // currently can swap the mosaic plot only Names Default to Here(1); dt = Open( "$SAMPLE_DATA/Big Class.jmp" ); myr = Contingency( Y( :Age ), X( :sex ) ); // Have to have a Contingency Analysis report open // Can add test to make sure it is open in the future myr = Current Report(); // taking apart CrossTabBox was easier using XML than JSL...
Vball247

Discussions |
Oct 29, 2018 2:18 PM

3253 views | 0 replies
how to change the type and color of lines in graph

I am trying to show line of fit in graph builder for several sets of data. The data table have many columns, I want to show the column(i) vs column(1).Every column can be grouped by A1 & a, also can be grouped by B1 & b, but except column(1). The follow is the chart about column(2) vs column(1): I use the follow script to change the type of lines:Dispatch( {}, "400", ScaleBox, {Legend Model( 8,...
Yu

Discussions |
Sep 25, 2018 2:34 AM

3681 views | 0 replies
Mean separation letter from test slices

Hello!

How do I get the mean separation letter in for each level of a factor when interaction is significant? For example, if I have A*B interaction and I want to get the mean separation of B at each level of A, how do I get the LSD letters in JMP? I can do test slices and that will use the DF of the full analysis, but this does not shows which mean of B differs. If I do multiple comparison: How ca...
jfranc19

Discussions |
Sep 14, 2018 2:35 PM

2514 views | 0 replies
repeated-measures ANCOVA: How to perform the analysis when the parallel slope assumpt. doesn't meet?

Hi all,I need to perform the ANCOVA for a repeated-measures design. I tried to adapt the Julian's ANCOVA procedure showed on the https://www.youtube.com/watch?v=mApbp1RDy-U to my study case (repeated-measures design). Initially, I did the following actions: 1. In the Fit Y by X dialogue: I selected VAR_Y as "Y, Response" and VAR_X as "X, Factor";2. For "Group by" I selected the variable Timepoint;...
Reinaldo

Discussions |
Jun 18, 2018 6:31 AM

3511 views | 0 replies
Time Series - Prewhiten

Hello Everyone, My question pertains to understanding what the terminology in JMP's prewhiten platform means.Also, understanding how that helps me determine an appropriate Transfer Function that I can use to test whether x causes y. JMP's prewhiten output shows three different ACF's labeled "Prewhiten Corr", "Noise AutoCorr", & "Noise Partial AutoCorr".
What is the Prewhiten Corr, Noise AutoCorr, &...
nopon649

Discussions |
Jun 7, 2018 11:10 PM

2509 views | 0 replies