JMP User Community

Latest Discussions

How to remove/avoid a black background in eps files?

Hi, I work on Windows (with JMP 16) and want to create eps files. I found the following information on the web: https://community.jmp.com/t5/JMPer-Cable/Getting-high-quality-graphics-out-of-JMP/ba-p/354772However, when I follow these steps, I get eps files with a black background and without the labels on the axes. To fix the problem, I also tried the Transparant Background mentioned in Saving Pub...
YellowSubmarine

Discussions |
Feb 5, 2022 5:42 AM

4112 views | 2 replies
paired t-test with censored data

Hello, I have microbial count data (log 10) that is censored. The desire is to compare a Test period to a Baseline, and determine if there's a statistically significant reduction in microbial counts. From what I can see, only Gen Reg can do censored data and use a Blocking factor. The blocking factor is the only way I can think of to link the paired Test and Baseline results. But I seem to not...
paulp

Discussions |
Feb 4, 2022 2:51 PM

3403 views | 4 replies
Profiler discussion continued

Recent discussion about how to interpret standard errors from the profiler have not converged to a solution, so I will start this again - with a different example and some more clarity (I hope) on my question. I've attached one of the famous Anscombe quartet datasets - the one where a linear regression model is appropriate. I fit a multiple regression model and saved the mean prediction standard...
dale_lehman

Discussions |
Feb 4, 2022 8:59 AM

1478 views | 1 replies
How to constrain asymptotes in 4PL fitting

A little background info:
New user of JMP here, running JMP16 and know how to perform basic 4PL fitting and analysis with JMP.

Here is the question:
We often need to set values of upper or lower asymptote when fitting incomplete IC50 curves with 4PL analysis.
Is there a way to do this with JMP?

Thanks
GroupSquareWolf

Discussions |
Feb 4, 2022 4:38 AM

1732 views | 1 replies
Bacterial cell growth fit modeling with stacked data

I'm super new to JMP and was wondering if there's a way to fit a bacterial growth curve (sigmoidal) in order to extract the growth rate. The way I usually do this is by plotting the curve in excel, picking the points the correspond to exponential growth (the middle of the curve), plotting those on a log scale y axis and adding an exponential fit trendline. The exponential coefficient in the trendl...
PriorChipmunk23

Discussions |
Feb 4, 2022 4:13 AM

2611 views | 1 replies

Previous
Next

Latest Discussions

How to remove/avoid a black background in eps files?

Hi, I work on Windows (with JMP 16) and want to create eps files. I found the following information on the web: https://community.jmp.com/t5/JMPer-Cable/Getting-high-quality-graphics-out-of-JMP/ba-p/354772However, when I follow these steps, I get eps files with a black background and without the labels on the axes. To fix the problem, I also tried the Transparant Background mentioned in Saving Pub...
YellowSubmarine

Discussions |
Feb 5, 2022 5:42 AM

4112 views | 2 replies
Profiler discussion continued

Recent discussion about how to interpret standard errors from the profiler have not converged to a solution, so I will start this again - with a different example and some more clarity (I hope) on my question. I've attached one of the famous Anscombe quartet datasets - the one where a linear regression model is appropriate. I fit a multiple regression model and saved the mean prediction standard...
dale_lehman

Discussions |
Feb 4, 2022 8:59 AM

1478 views | 1 replies
How to constrain asymptotes in 4PL fitting

A little background info:
New user of JMP here, running JMP16 and know how to perform basic 4PL fitting and analysis with JMP.

Here is the question:
We often need to set values of upper or lower asymptote when fitting incomplete IC50 curves with 4PL analysis.
Is there a way to do this with JMP?

Thanks
GroupSquareWolf

Discussions |
Feb 4, 2022 4:38 AM

1732 views | 1 replies
Bacterial cell growth fit modeling with stacked data

I'm super new to JMP and was wondering if there's a way to fit a bacterial growth curve (sigmoidal) in order to extract the growth rate. The way I usually do this is by plotting the curve in excel, picking the points the correspond to exponential growth (the middle of the curve), plotting those on a log scale y axis and adding an exponential fit trendline. The exponential coefficient in the trendl...
PriorChipmunk23

Discussions |
Feb 4, 2022 4:13 AM

2611 views | 1 replies
No table linking after saving the project?

Hi,when I generate a summary table with the option "link to original data table" (selected by default), the two tables are linked:By selecting a row in the summary table the corresponding rows in the original table are selected.Cool.This also works for selections in Graphs and Dashboards.Very cool! Now my problem:After saving both tables to a project file, (precisely: after close & re-open the pro...
hogi

Discussions |
Feb 3, 2022 4:19 AM

752 views | 0 replies

Previous
Next

Latest Discussions

No table linking after saving the project?

Hi,when I generate a summary table with the option "link to original data table" (selected by default), the two tables are linked:By selecting a row in the summary table the corresponding rows in the original table are selected.Cool.This also works for selections in Graphs and Dashboards.Very cool! Now my problem:After saving both tables to a project file, (precisely: after close & re-open the pro...
hogi

Discussions |
Feb 3, 2022 4:19 AM

752 views | 0 replies
Setting Guardbands on Test Limits Using EMP

Hello. I am trying to use the EMP tool to help set guardbands to my test limits based on my gauge R and R data from a final test machine.I used 10 devices and measured these devices 5 times each, across 5 different test sites on the machine.I need to know how much to guardband my Upper and Lower specs. I am having trouble understanding how to apply the data in the EMP report. I feel like this is a...
Jbritsch04

Discussions |
Feb 2, 2022 8:49 AM

947 views | 0 replies
How to introduce lower bounds for simulated data in Profiler platform

Hi JMP community, (JMP Pro 16.0.0) I'm hoping to find out if there is a way to include lower bounds to simulated data in the Profiler platform. I have several predictors going into a model, but few data points to fit. So, in order to generate simulated ("synthetic") data, I use the Prediction Profiler platform along with the multivariate correlation structure of the data to generate thousands ...
SDF1

Discussions |
Feb 1, 2022 11:09 AM

725 views | 0 replies
Query Builder filtering on date stored in Varchar(20)

Query Builder - date filter.SQL ServerJMP version 16.2In the database (SQL Server) I get the Date field called RETURNDATE in ‘varchar20’ – I would like to use the Calendar functionality in the filter to select my dates I tried to create a calculated column (Calc1) and specify CAST([RETURNDATE] as date), which he doesn’t like. Using SQL outside Query BuilderSELECT TOP (1000) [LABJOBNO] ,[DESPA...
HansD

Discussions |
Jan 25, 2022 6:12 AM

1607 views | 0 replies
M1 Macbook Pro JMP Capabilities

Hi all,
I'm thinking about upgrading from my windows set-up and running a M1 Macbook Pro as my primary set up. I wanted to open up the discussion and see if any other JMP users were using the newest Macbook Pro and if they have run into any hurdles yet? I do a lot of R/Python integration. I do have a decent set up right now, but want to know if anyone else has tested out this connection and knows ...
MikeDereviankin

Discussions |
Jan 21, 2022 1:52 PM

961 views | 0 replies