JMP User Community

Latest Discussions

JMP - How to pass a dynamic list of columns to Summary()

Hi,I want to open a data table (using Big Class.jmp as example, but want to do this for any table) and create a summary table for each column, returning the number of non-missing values for each column (as shown in table below).N RowsN(name)N(age)N(sex)N(height)N(weight)404040404040I have tried two different approaches to this and have had no success (I'm using JMP 9.0.3 64bit).In the first exampl...
brianm

Discussions |
May 5, 2020 7:25 AM

10803 views | 3 replies
How to Insert(Append/Write) data to SQL Server database in table from JMP dataTable through script

Hello, I scripted data preparation / data cleaning with various formula / formats and output data is ready for Insert(Write) to SQL server from JMP table. I connected to SQL, but not able to insert(append) data to SQL server database on target table. Can any one help on this situation to overcome on SQL statement to append. Here is my end script which is ready (JMP Table = "Upload") to write. D...
RamManickam

Discussions |
May 5, 2020 3:41 AM

8883 views | 7 replies
Full Factorial Design questions

Hi! I have a full factorial design with four factors. Three of the factors have three levels and the other one has five levels. So I have 3x3x3x5 total runs with no replicates. I have a few questions as follows: 1. After running the model, it shows significant Lack of Fit. However, there are no replicated data points. How can JMP perform the lack of Fit test then?2. Since it shows lack of fi...
CYLiaw

Discussions |
May 5, 2020 2:58 AM

9519 views | 13 replies
Show only 1 limit on the control chart (when there is only one limit).

Hi everyone,I'm using JMP 11. Using a script, I build a (generic) control chart to plot our lab test results. The problem is that I sometimes don't have a upper or lower control limit (e.g.: trace metals: no UCL, Assay: No LCL). When there is a one-sided limit, I don't want to see the missing limit on the chart for obvious reasons. How can I remove one limit from the control chart?Thanks guys,...
jan_solo

Discussions |
May 4, 2020 1:20 PM

11720 views | 8 replies
How to save a tabulate report to HTML

Hi All - thank you in advance for your help I am trying to save a finished tabulate report as a HTML file but it is not being saved. I am using the below script: dt1 = Open( "C:\***path***\Thermal_Test_results_DZ.csv" ); dt2 = dt1 << Tabulate( Show Control Panel( 0 ), Add Table( Column Table( Statistics( N ) ), Column Table( Grouping Columns( :BIN ) ), Column Table( Grouping Columns(...
DZ_932

Discussions |
May 4, 2020 10:25 AM

3224 views | 4 replies

Previous
Next

Latest Discussions

How to Insert(Append/Write) data to SQL Server database in table from JMP dataTable through script

Hello, I scripted data preparation / data cleaning with various formula / formats and output data is ready for Insert(Write) to SQL server from JMP table. I connected to SQL, but not able to insert(append) data to SQL server database on target table. Can any one help on this situation to overcome on SQL statement to append. Here is my end script which is ready (JMP Table = "Upload") to write. D...
RamManickam

Discussions |
May 5, 2020 3:41 AM

8883 views | 7 replies
Full Factorial Design questions

Hi! I have a full factorial design with four factors. Three of the factors have three levels and the other one has five levels. So I have 3x3x3x5 total runs with no replicates. I have a few questions as follows: 1. After running the model, it shows significant Lack of Fit. However, there are no replicated data points. How can JMP perform the lack of Fit test then?2. Since it shows lack of fi...
CYLiaw

Discussions |
May 5, 2020 2:58 AM

9519 views | 13 replies
Show only 1 limit on the control chart (when there is only one limit).

Hi everyone,I'm using JMP 11. Using a script, I build a (generic) control chart to plot our lab test results. The problem is that I sometimes don't have a upper or lower control limit (e.g.: trace metals: no UCL, Assay: No LCL). When there is a one-sided limit, I don't want to see the missing limit on the chart for obvious reasons. How can I remove one limit from the control chart?Thanks guys,...
jan_solo

Discussions |
May 4, 2020 1:20 PM

11720 views | 8 replies
How to save a tabulate report to HTML

Hi All - thank you in advance for your help I am trying to save a finished tabulate report as a HTML file but it is not being saved. I am using the below script: dt1 = Open( "C:\***path***\Thermal_Test_results_DZ.csv" ); dt2 = dt1 << Tabulate( Show Control Panel( 0 ), Add Table( Column Table( Statistics( N ) ), Column Table( Grouping Columns( :BIN ) ), Column Table( Grouping Columns(...
DZ_932

Discussions |
May 4, 2020 10:25 AM

3224 views | 4 replies
Multivariate vs. Graph builder

Hi,When I try to find correlation between Age and Height by using multivariate analysis R2=0.9807When I apply the same thing by using Graph Builder R2=0.962 What is the reason of this change. This difference will be increase based on results. Could someone help on this? You can also see jmp file on enclosed.
nac

Discussions |
May 4, 2020 7:21 AM

2415 views | 2 replies

Previous
Next

Latest Discussions

How do I have two different chart types in a single graph using two axis?

While doing some research to answer this question, I found this article on the JMP community that helped me get started. How do I do a combination bar and line plot using Overlay Plot? Using the big class sample data example of height and weight I was able to create a bar chart for weight and a line plot for height on the same chart using the Overlay Plot. To do this, first clear the row s...
Bass_Masri

Discussions |
Apr 28, 2020 4:28 PM

4789 views | 0 replies
How do I calculate z-scores at different aggregation levels?

Hello, How do I use JSL to calculate Z-scores at different levels of aggregation? I am working with cancer mortality data (1999 - 2015) at the county-level. I need to calculate Z-scores to compare each county to the others within a state and all counties within the country. I cannot simply use the standardize function because it automatically takes an average of rates--which is invalid unless the...
Jmsouch

Discussions |
Feb 26, 2020 7:04 AM

2262 views | 0 replies
Calling Windows API ImageViewer.dll to display JPG files.

I am working with a very large database of image files and want to be able to display the file for the user for visual inspection from a script. I have been able to get the following code to load the DLL but get an error requesting a signature argument. Does anyone know how to get a signature string from the system to pass to the DLL. ERROR MESSAGE FORM LOG: Second argument to CallDLL must be a ...
DMeakin1

Discussions |
Jan 17, 2020 10:19 AM

2064 views | 0 replies
Running script from command line on MAC

Not a mac person. Does anyone know how to run a jsl script from command line on a mac? I specifically mean WITHOUT "//!" at the top of it. I have this but it only opens the file unless I have the "//!" open -g -W -a /Applications/JMP\ Pro\ 15.app/ $(pwd)/myscript.jsl
vince_faller

Discussions |
Jan 10, 2020 2:26 PM

1690 views | 0 replies
how to add confounding variable

I am working with a multi level data. Data is attached.In this dataset, I have 8- X variable: cumulative risk (continuous), all other risk (dichotomous). 3- Y variables: insurance and practice (dichotomous) and time (continuous)I have one confounding variable Age (continuous). I will have to add random effect to X variable. But I am confused how to add confounding variable to this analysis. Can an...
billi

Discussions |
Jan 6, 2020 9:39 AM

1624 views | 0 replies