JMP User Community

Latest Discussions

Uncertainty bounds on Surface Plots and saved prediction equations

I've been asking for uncertainty bounds (e.g. confidence bounds, prediction bounds, etc.) on surface plots for years but I don't think it's ever going to happen. I guess it's more difficult to code than I had realized. Regardless, I thought I'd ask again. I also thought I'd mention that it's not always possible to reproduce the uncertainty bounds of a saved prediction equation in the factor profil...
mckowalski

Discussions |
Apr 5, 2022 12:19 PM

1156 views | 2 replies
Stability platform vs destructive degradation platform

What is difference between stability test platform and destructive degradation platform? Both the platforms will give information about the degradation and time when specified limit will be crossed.
billi

Discussions |
Apr 5, 2022 11:47 AM

1056 views | 2 replies
Setting up a recursive loop in jsl

hi, I've built a long script where a curve fitting is performed iteratively on a large data table which many variables listed in 1 column. However at the end of the process some of those variables are not fitted (the process failed for one reason or another). At this point, I create a 'failed fitting' list of the variables that were not fitted in the previous and create a subset from the source ta...
Sburel

Discussions |
Apr 5, 2022 9:10 AM

2060 views | 5 replies
How to weigh 5 as the best and 0 as the worst. Multiple regression (fit model)

Its many years since I used JMP, so sorry for the stupid question. I made a survey where the answers is rated from 0 (Not included) to 5 (The best). I need to have this included in my regression model. How do I do that? Its concerning many variables which all explains preferences. Some are very important (rated 5) and some are less important (from 4 to 0) I just need to know how I weigh them in my...
Thestudent

Discussions |
Apr 5, 2022 5:23 AM

990 views | 1 replies
Close All Like This

Hi, In JSL, I create a Control Chart Builder, which consists of couple of charts and limit summaries. I would like to close all Limit summaries (Outline Boxes) automatically in JSL in the same fashion as when using "Close All Like This" (the option available with the right click on the Outline Box). Is there a way for it in JSL? I have found Show Limit Summaries (0), but it unable to open Limit S...
LiPav

Discussions |
Apr 5, 2022 5:18 AM

1243 views | 1 replies

Previous
Next

Latest Discussions

Uncertainty bounds on Surface Plots and saved prediction equations

I've been asking for uncertainty bounds (e.g. confidence bounds, prediction bounds, etc.) on surface plots for years but I don't think it's ever going to happen. I guess it's more difficult to code than I had realized. Regardless, I thought I'd ask again. I also thought I'd mention that it's not always possible to reproduce the uncertainty bounds of a saved prediction equation in the factor profil...
mckowalski

Discussions |
Apr 5, 2022 12:19 PM

1156 views | 2 replies
Stability platform vs destructive degradation platform

What is difference between stability test platform and destructive degradation platform? Both the platforms will give information about the degradation and time when specified limit will be crossed.
billi

Discussions |
Apr 5, 2022 11:47 AM

1056 views | 2 replies
Setting up a recursive loop in jsl

hi, I've built a long script where a curve fitting is performed iteratively on a large data table which many variables listed in 1 column. However at the end of the process some of those variables are not fitted (the process failed for one reason or another). At this point, I create a 'failed fitting' list of the variables that were not fitted in the previous and create a subset from the source ta...
Sburel

Discussions |
Apr 5, 2022 9:10 AM

2060 views | 5 replies
Nested MSA question

Hi All, I have a question about Nested MSA. I need to understand what is the Part-to-part variation and the measurement system variation. But...The parts are destroyed once measure by the said machineThere is some variation in every part and the measurement system in question is the only one that can measure itWe know the measurement system is not stableSo, how can I calculate if there is a system...
vipul

Discussions |
Apr 4, 2022 8:13 AM

3022 views | 3 replies
two-way ANOVA with unbalanced data

hello,I can't find anything about the recommended way to treat unbalanced data in JMP (v15) in the help menu. If you do a search in these forums, there are lots of previous questions about this, but it's not clear to me which, if any, is considered the best option! So, apologies for raising what may be a frequent question, but if anyone can point me to a previous answer that is helpful I would be ...
Jake_b

Discussions |
Apr 4, 2022 6:58 AM

2918 views | 6 replies

Previous
Next

Latest Discussions

Column Switcher Button Removed from Plot Window Toolbar in JMP 16 for Mac

Recently switched from JMP15 for Mac to JMP16 for Mac. I was surprised to see the column switcher button removed as an option in an analysis/plot window. It used to reside up top next to the local data filter button (see black circle). The option to customize it back is also missing and has been replaced by a 'properties' button. This may also prove useful but I'm new to it. To get the colum...
datanaut

Discussions |
Mar 17, 2022 3:18 PM

842 views | 0 replies
No table linking after saving the project?

Hi,when I generate a summary table with the option "link to original data table" (selected by default), the two tables are linked:By selecting a row in the summary table the corresponding rows in the original table are selected.Cool.This also works for selections in Graphs and Dashboards.Very cool! Now my problem:After saving both tables to a project file, (precisely: after close & re-open the pro...
hogi

Discussions |
Feb 3, 2022 4:19 AM

597 views | 0 replies
Setting Guardbands on Test Limits Using EMP

Hello. I am trying to use the EMP tool to help set guardbands to my test limits based on my gauge R and R data from a final test machine.I used 10 devices and measured these devices 5 times each, across 5 different test sites on the machine.I need to know how much to guardband my Upper and Lower specs. I am having trouble understanding how to apply the data in the EMP report. I feel like this is a...
Jbritsch04

Discussions |
Feb 2, 2022 8:49 AM

769 views | 0 replies
How to introduce lower bounds for simulated data in Profiler platform

Hi JMP community, (JMP Pro 16.0.0) I'm hoping to find out if there is a way to include lower bounds to simulated data in the Profiler platform. I have several predictors going into a model, but few data points to fit. So, in order to generate simulated ("synthetic") data, I use the Prediction Profiler platform along with the multivariate correlation structure of the data to generate thousands ...
SDF1

Discussions |
Feb 1, 2022 11:09 AM

589 views | 0 replies
Query Builder filtering on date stored in Varchar(20)

Query Builder - date filter.SQL ServerJMP version 16.2In the database (SQL Server) I get the Date field called RETURNDATE in ‘varchar20’ – I would like to use the Calendar functionality in the filter to select my dates I tried to create a calculated column (Calc1) and specify CAST([RETURNDATE] as date), which he doesn’t like. Using SQL outside Query BuilderSELECT TOP (1000) [LABJOBNO] ,[DESPA...
HansD

Discussions |
Jan 25, 2022 6:12 AM

1391 views | 0 replies