JMP User Community

Latest Discussions

Is there a function to convert a character to its ASCII equivalent?

Is there a function to conver a character to an ascii number? In the end I need to translate a character based column in data into its numerical equivalent. They always happen to be 1 or 2 digits. So effectively "A" becomes 1"Z" becomes 26"AA" becomes 27"AB" becomes 28 etc. So say DIE_COLUMN = "CA" I want to return 79 I've come up with the following thoroughly ugly formula... but if there was ...
LikelihoodFaces

Discussions |
Apr 28, 2022 11:36 AM

2857 views | 3 replies
How to detect outliers

Hi all, I would like to make a script to detect outliers based on my data population.Based on the image below, I tried to calculate mean of all pockets from 0 to 6 and applied method ((Mean +- (3*sigma)) to find outliers. By direct observation, Pocket 2 has a lot of outliers. However, in case the value of variation data points on Pocket2 is within ((Mean+-(3*sigma)), my method cannot detect them a...
PhamBao

Discussions |
Apr 28, 2022 9:00 AM

1340 views | 1 replies
Spec limits for Control Chart Builder with multiple phases and where condition

Using JSL in JMP ver. 15.2.0. JSL code is embedded in attached table with script name = 'Control Charts'. I'm struggling with behavior in nested loops when attempting to add spec limits (LSL, Target, USL) via custom graphics script for variable number of phase groupings and 'where' conditions. My nested loops currently result in spec limits for last chart being applied to all control charts crea...
Todd_Lester

Discussions |
Apr 27, 2022 3:42 PM

1218 views | 1 replies
How to take events into account correctly in a model?

Hello everyone,
I would like to consult you for a modeling.
I have a process with a response Y and parameters X1, X2, X3, etc.
The analysis of the process took place over a long period of 3 years. I would now like to gather all the data to analyze the process as a whole. The problem is that the machine associated with the process has experienced some changes and even some hazards during these 3 year...
Steph_Georges

Discussions |
Apr 25, 2022 3:01 PM

5255 views | 10 replies
How do I use Power Explorer for designs with interaction effects?

I am trying to calculate for power for a 4^2 full factorial using the Power Explorer for ANOVA. In the Fixed Parameters window I can input the number of groups i.e. 4 and everything else at their default values which gives me a sample size of 20 per group. Did the calculation consider the model with interactions or just the main efffects?
elb89

Discussions |
Apr 25, 2022 5:03 AM

1145 views | 1 replies

Previous
Next

Latest Discussions

Is there a function to convert a character to its ASCII equivalent?

Is there a function to conver a character to an ascii number? In the end I need to translate a character based column in data into its numerical equivalent. They always happen to be 1 or 2 digits. So effectively "A" becomes 1"Z" becomes 26"AA" becomes 27"AB" becomes 28 etc. So say DIE_COLUMN = "CA" I want to return 79 I've come up with the following thoroughly ugly formula... but if there was ...
LikelihoodFaces

Discussions |
Apr 28, 2022 11:36 AM

2857 views | 3 replies
How to detect outliers

Hi all, I would like to make a script to detect outliers based on my data population.Based on the image below, I tried to calculate mean of all pockets from 0 to 6 and applied method ((Mean +- (3*sigma)) to find outliers. By direct observation, Pocket 2 has a lot of outliers. However, in case the value of variation data points on Pocket2 is within ((Mean+-(3*sigma)), my method cannot detect them a...
PhamBao

Discussions |
Apr 28, 2022 9:00 AM

1340 views | 1 replies
Spec limits for Control Chart Builder with multiple phases and where condition

Using JSL in JMP ver. 15.2.0. JSL code is embedded in attached table with script name = 'Control Charts'. I'm struggling with behavior in nested loops when attempting to add spec limits (LSL, Target, USL) via custom graphics script for variable number of phase groupings and 'where' conditions. My nested loops currently result in spec limits for last chart being applied to all control charts crea...
Todd_Lester

Discussions |
Apr 27, 2022 3:42 PM

1218 views | 1 replies
How do I use Power Explorer for designs with interaction effects?

I am trying to calculate for power for a 4^2 full factorial using the Power Explorer for ANOVA. In the Fixed Parameters window I can input the number of groups i.e. 4 and everything else at their default values which gives me a sample size of 20 per group. Did the calculation consider the model with interactions or just the main efffects?
elb89

Discussions |
Apr 25, 2022 5:03 AM

1145 views | 1 replies
JMP script to create control charts with phases

Hi everyone,I'm asking your support because I need to create control chart with fixed limits and phases and I want to get a script out of it.I managed to created a DT with the limit keys and values and to create the control charts I need from "legacy control charts>Levey-Jennings" and then to get limits from the DT created before.Now, when I save the script I'm not getting any reference to the lim...
js1985

Discussions |
Apr 25, 2022 4:55 AM

2513 views | 5 replies

Previous
Next

Latest Discussions

Error When Trying to Create User to Access the JMP Virtual Lab

While taking the Exploratory Data Analysis module, it is time to practice. However, when trying to access the JMP Virtual Lab, I cannot get past the "Create User" option. JMP VIRTUAL LABTo use the Virtual Lab, please select the Create User link below. If you would prefer to use software on your own machine, please select the Download Data link below.
Create User Download Course Data Clicking the C...
TielsForTheWin

Discussions |
Apr 14, 2022 10:48 AM

939 views | 0 replies
Setting Guardbands on Test Limits Using EMP

Hello. I am trying to use the EMP tool to help set guardbands to my test limits based on my gauge R and R data from a final test machine.I used 10 devices and measured these devices 5 times each, across 5 different test sites on the machine.I need to know how much to guardband my Upper and Lower specs. I am having trouble understanding how to apply the data in the EMP report. I feel like this is a...
Jbritsch04

Discussions |
Feb 2, 2022 8:49 AM

908 views | 0 replies
JMP > GraphBuilder > Parallel Plots >River / Sankey Plots > Maximum Items?

Hi JMP Community, I just came across an odd behavior in GraphBuilder with the Parallel Plot > Sankey Plot. If I limit the input to a maximum of 66 rows, the plot looks good. However, if I bump the number of rows to 67 or more,the output is no longer useful: no annotations: Is there a trick to maintain the axis annotations as shown in the first plot? Thanks. Best, TS
Thierry_S

Discussions |
Dec 9, 2021 3:30 PM

3239 views | 0 replies
Permutation Tests and Monte Carlo Cross Validations Using the Simulation Platform

I'm trying to do permutation tests and Monte Carlo Cross Validations with the Iris sample dataset as a MWE for our dataset. I'm not sure if I'm doing things and interpreting output correctly. 1) Create New Formula Column (Random->Sample Without Replacement) for the Species Column for Permutation Test. 2) Create a Validation Column (0.75/0.25 split) and a new Formula Column (Random->Sample Withou...
mjmg

Discussions |
Dec 1, 2021 7:53 AM

1009 views | 0 replies
Variability Chart Platform Factor Re-Insert Positions (Not Swapping)

Hello JMP Community, I understand dragging between any two factors swaps the location pairs in the Variability Chart platform. Is there a way to drag to specifically re-insert the factors instead? For example, can I drag "Layout" between "Horizontal" and "Wafer ID" in the attached screenshot instead of performing multiple drags to have the intended result? I am aware I can do this reordering with ...
Technician

Discussions |
Oct 26, 2021 11:04 AM

1326 views | 0 replies