JMP User Community

Latest Discussions

JMP 16 scripting issue for automation (migrate from JMP 15)

Hello Expert, I just started using JMP 16 for analysis report automation (scripting). I'm still migrating some of my scripts build in JMP 15 into JMP 16 and tweaked existing script build in JMP 15 to do other type of analysis reports in JMP 16. I just found out that in JMP 16, the script saved for graph builder "Add Filter" automatically define N items in the filter according to my test data.The i...
WebDesignesCrow

Discussions |
Jan 19, 2023 7:30 PM

1247 views | 1 replies
How do I correctly iterate over column names to produce summary tables grouped by each?

Hi there, I'm writing a script in jsl to search through column headers, find those beginning with the number 9, and then produce a summary table from a large data set that is grouped by those columns. Currently, my code is working for the first column, but seems to stop after that. Any help would be appreciated! dt = Current Data Table(); N = N Col( dt ); For( i = 1, i <= N, i++, colname = Colu...
OC200m

Discussions |
Jan 18, 2023 12:42 AM

1745 views | 2 replies
script avec graphs et splitter box

bonjour,j'aimerais refaire ce script (source= index des scripts JMP) mais avec des graphiques dans chaque case. j'ai essayé mais les graphiques ne s'affichent pas. est-ce quelqu'un a un exemple?Names Default To Here( 1 ); New Window( "Splitter Example", box = V Splitter Box( Size( 640, 480 ), H Splitter Box( Spacer Box( <<Set Fill( 1 ); <<Color( RGB Color( 9, 112, 84 ) ); ),...
Françoise

Discussions |
Jan 17, 2023 2:29 PM

1891 views | 3 replies
Control charts - display error

Hi, I sometimes have a display error with control chart with the phase in the top of the plot when I use a script (see screenshot).Do you know how I can fix the issue ? Thank you very much and have a nice day, Jean
PersuasionCamel

Discussions |
Jan 16, 2023 8:18 AM

979 views | 1 replies
Get a jrp like script from a report window

Hello everyone, I am trying to save my report script to a jrp file as explained in: Save charts as ".jrp" file in JSL However, I don't have direct access to the Graph Builder that generated my Report Window. I'm getting my reports via Get Window List(Type("Reports")); And now I need to extract the script to save it as a text file, however I can't figure out how to get that script. When using << ...
Samu

Discussions |
Jan 12, 2023 5:50 AM

5839 views | 8 replies

Previous
Next

Latest Discussions

Control charts - display error

Hi, I sometimes have a display error with control chart with the phase in the top of the plot when I use a script (see screenshot).Do you know how I can fix the issue ? Thank you very much and have a nice day, Jean
PersuasionCamel

Discussions |
Jan 16, 2023 8:18 AM

979 views | 1 replies
JSL move files

Can JSL be used to file files with specific name from 1 folder, and move that file to another folder?
Not sure if anyone has tried it.Thanks
Stokes

Discussions |
Jan 11, 2023 11:47 AM

1320 views | 1 replies
For Each() syntax

Hello, I'm looking to expand the number of values that can be used in the For Each() function. In the scripting index and handful of examples I've found within JMP community and JMP itself, combined, I've only seen a single value and index used: For each( { val1, index}, ... ). I'd like to use: For each( { val1, val2, ..., valn, index}, ...) . When I increase the number of values in the curly bra...
StarfruitBob

Discussions |
Jan 5, 2023 2:39 PM

7027 views | 11 replies
Jmp script to get variability charts with common x-grouping

Hi,I am a bit new to jmp, so bare with me. I was looking to graph variability plots that plot the same y-variable and same x-grouping but separated by different variables in the 'By' section. For example, how do I get the plot that looks like the one on the left and not the one on the right (that it produces by default). Is there a JSL script to do such a thing?

FrequencyBison9

Discussions |
Dec 22, 2022 5:21 PM

1571 views | 1 replies
email invite and sharepoint compatibility

I had a few jsl questions.Can jsl code be written to send a meeting invite for outlook?Can a link be set up on sharepoint to automatically run a script when the link is clicked? (without prompting and downloading the script first?)If I integrated to the two questions you will get the full pictureUser clicks the sharepoint link which runs the script Window opens to enter email addressesUser types i...
Derek11

Discussions |
Dec 21, 2022 12:55 PM

1357 views | 1 replies

Previous
Next

Latest Discussions

C Stack Usage Error When Sending Code to R

Hello, I'm trying to invoke some commands in R using the R Submit function in JSL and am getting the error below. Is this an issue with JMP17 and R integration? It only happens when I invoke a specific package using JSL so it's hard for others to replicate w/o installing R and the package as well. I'm using JMP 17.0 and R 4.2.0. Never saw this error with JMP 16. "Error: C stack usage 4123778 is to...
vigslayer

Discussions |
Dec 15, 2022 8:14 PM

1099 views | 0 replies
How to run JSL script in user opened JMP session instead creating a new seesion by JMP.dll?

Currently I developed a windows application based on Interop.JMP.dll. The application contains a functionality to generate JSL file and run it in JMP but I got a issue now. It seems can only create a new session and run it by application instead of using the session that user opened first. I'd like to confirm whether it's possible to run JSL in the session by user opened manually. Appreciate it if...
SquaresDingo505

Discussions |
Oct 24, 2022 7:23 PM

858 views | 0 replies
How to Analyze and Graph Responses with Supercategories

I use JMP Pro 16. I am doing MCA on 90 columns that have supercategories. I want to do the analysis and viz on the supercategory classification. Is there a way to do this without having to create separate columns that only have the supercategory classification? PS: I don't know how to do JSL scripting.
TCM

Discussions |
Oct 21, 2022 5:59 AM

905 views | 0 replies
標準化列名稱如何用變數取代求解

//新增周標準化
weekEMC_HF_C_12_0 = Data Table( "周_EMC_HF_C_12um" ) << Get Column Names( string );
weekEMC_HF_C_12 = {};
//少一周={:"2022W38"n,:"2022W40"n,:"2022W41"n};
For( j = N Items( weekEMC_HF_C_12_0 ), j >= (N Items( weekEMC_HF_C_12_0 ) - 5), j--,
Insert Into( weekEMC_HF_C_12, weekEMC_HF_C_12_0[j] )
);
Try(
Local( {old dt = Current Data Table()},
Current Data Table( Data Table( "周_EMC_HF_C_12um" ) );
For Each( ...
Ken697

Discussions |
Oct 20, 2022 9:22 PM

818 views | 0 replies
Model classification thresholds add-in display "negative" probability

Hi, I've been looking at this add-in which is very useful.https://community.jmp.com/t5/JMP-Add-Ins/Exploring-Model-Classification-Thresholds/ta-p/66964 In our case we don't have a probability but instead we have a status and a measurement that ranges between -10 and 10.I want to adapt the script so that the slider can move between -10 and 10 (I've already done it and it works). However the "Probab...
Agustin

Discussions |
Sep 13, 2022 6:43 AM

708 views | 0 replies