About Aziza

Aziza

It was just a question of curiosity, which makes it not easy for me to formulate it in a specific way. But let's assume these factors depend on the levels of other factors. This would be an interesting case.

Aziza

Thanks for your informative response. This will help me a lot.

Aziza

Thank you David, these all are very useful.

Aziza

Hi All, Assume we have 3 factors with 2 levels each. If I understood it correctly, for small number of factors we can consider a full factorial design, in this case would be 2^3 full factorial design. What should we do, if by some reason, 2 out of 8 conditions is not possible to run? Is there any way/concept to handle this situation? Thanks in advance!

Aziza · ‎01-28-2020

Great! It worked fine! Thank you!

Aziza · ‎01-28-2020

Hi All, is there any function in JMP which fills the missing values using last or previous observation? Thanks, Aziza

Aziza · ‎10-17-2019

Great job, Evan!

Aziza · ‎09-18-2019

Thank you! 🙂

Aziza · ‎09-18-2019

Thank you! That's a very good example and solution!

Aziza · ‎08-07-2019

Hi, I have a script to reproduce Graph Builder plots. Three script files, each should reproduce graph builder outputs for 15 different variables. Basically, I used the Graph Builder to plot the data the way I want, saved the script behind it and repeated it for the next 14 variables. As the result, I have smth like this: //the first script file dt=currentdatatable(); obj1=dt<<GraphBuilder(); obj2=dt<<GraphBuilder(); ... obj15=dt<<GraphBuilder(); // Concern: repeation of big parts in each objects's code I want to keep the Graph Bulder features settings for all objects (15 in total), but avoid repeatitions within the code (some examples below). Is there any way I can define such parts of the code at the begining of the script (or in a seperate file (because I have other script files using the same parts of the code) and call it while running the code) and use those as the variables within the code to make the code to look simpler, shorter? This way is efficient also if I want to make some changes. The other question: any suggestions on how I could improve my scripting skills? Thank you very much. Examples: Dispatch( {}, "400", LegendBox, {Set Title( "" ), font( "Segoe UI", 11, "Plain" ), Legend Position( {8, [1, 5, 9, 3, 6, 11], 9, [0, 4, 8], 10, [2, 7, 10]} ), Position( {1, 5, 9, 3, 6, 11, 0, 4, 8, 2, 7, 10} )} ) or Dispatch( {}, "400", ScaleBox, {Legend Model( 8, Level Name( 0, "Variable 3 Averages", Item ID( "3", 1 ) ), Level Name( 1, "Variable 5 Averages", Item ID( "5", 1 ) ), Level Name( 2, "Variable 6 Averages", Item ID( "6", 1 ) ), Level Name( 3, "Variable 3 Standard Deviation", Item ID( "3", 2 ) ), Level Name( 4, "Variable 5 Standard Deviation", Item ID( "5", 2 ) ), Level Name( 5, "Variable 6 Standard Deviation", Item ID( "6", 2 ) ), Base( 0, 0, 0, Item ID( "3", 1 ) ), Base( 1, 0, 1, Item ID( "5", 1 ) ), Base( 2, 0, 2, Item ID( "6", 1 ) ), Base( 3, 0, 0, Item ID( "3", 2 ) ), Base( 4, 0, 0, Item ID( "5", 2 ) ), Base( 5, 0, 0, Item ID( "6", 2 ) ), Properties( 0, {Line Color( 53 ), Line Width( 4 ), Marker( "FilledCircle" ), Marker Size( 6 ), gradient( {Scale Values( [0 1] ), Width( 9 ), N Labels( 6 )} )}, Item ID( "3", 1 ) ), Properties( 1, {Line Color( 56 ), Line Width( 4 ), Marker( "FilledCircle" ), Marker Size( 6 ), gradient( {Scale Values( [0 1] ), Width( 9 ), N Labels( 6 )} )}, Item ID( "5", 1 ) ), Properties( 2, {Line Color( 38 ), Line Width( 4 ), Marker( "FilledCircle" ), Marker Size( 6 ), gradient( {Scale Values( [0 1] ), Width( 9 ), N Labels( 6 )} )}, Item ID( "6", 1 ) ), Properties( 3, {Line Color( 53 ), Line Width( 4 )}, Item ID( "3", 2 ) ), Properties( 4, {Line Color( 56 ), Line Width( 4 )}, Item ID( "5", 2 ) ), Properties( 5, {Line Color( 38 ), Line Width( 4 )}, Item ID( "6", 2 ) ), Properties( -1, {Line Color( 13 ), Line Width( 4 ), Marker( "FilledCircle" ), Marker Size( 6 ), gradient( {Scale Values( [0 1] ), Width( 9 ), N Labels( 6 )} )}, Item ID( "4", 1 ) ), Properties( -1, {Line Color( 13 ), Line Width( 4 )}, Item ID( "4", 2 ) ), Base( -1, 0, 1, Item ID( "5", 1 ) ), Level Name( -1, "Average", Item ID( "Mean", 1 ) ), Base( -1, 0, 0, Item ID( "Standard Deviation", 1 ) ), Properties( -1, {Line Color( 3 ), Marker( "FilledCircle" ), Marker Size( 6 ), gradient( {Scale Values( [0 1] ), Width( 9 ), N Labels( 6 )} )}, Item ID( "Mean", 1 ) ), Properties( -1, {Line Color( 1 ), Line Width( 4 )}, Item ID( "Standard Deviation", 1 ) ), Base( -1, 0, 0, Item ID( "95% confidence interval", 1 ) ), Properties( -1, {Line Color( 32 ), Line Width( 2 ), gradient( {Scale Values( [0 1] ), Width( 9 ), N Labels( 6 )} )}, Item ID( "95% confidence interval", 1 ) ) ), Legend Model( 9, Level Name( 0, "Variable 3 Individual Values", Item ID( "3", 1 ) ), Level Name( 1, "Variable 5 Individual Values", Item ID( "5", 1 ) ), Level Name( 2, "Variable 6 Individual Values", Item ID( "6", 1 ) ), Base( 0, 0, 0, Item ID( "3", 1 ) ), Base( 1, 0, 1, Item ID( "5", 1 ) ), Base( 2, 0, 2, Item ID( "6", 1 ) ), Properties( 0, {Line Color( 37 ), Line Width( 4 )}, Item ID( "3", 1 ) ), Properties( 1, {Line Color( 40 ), Line Width( 4 )}, Item ID( "5", 1 ) ), Properties( 2, {Line Color( 38 ), Line Width( 4 )}, Item ID( "6", 1 ) ), Level Name( -1, "Variable 4 Individual Values", Item ID( "4", 1 ) ), Base( -1, 0, 0, Item ID( "4", 1 ) ), Properties( -1, {Line Color( 42 ), Line Width( 4 )}, Item ID( "4", 1 ) ), Level Name( -1, "Individual Values", Item ID( "Main-Variable", 1 ) ), Properties( -1, {Line Color( 5 )}, Item ID( "Main-Variable", 1 ) ), Properties( -1, {Line Color( 5 ), gradient( {Scale Values( [0 1] ), Width( 9 ), N Labels( 6 )} )}, Item ID( "Main-Variable", 1 ) ) ), Legend Model( 10, Level Name( 0, "Variable 3 Smooth", Item ID( "3", 1 ) ), Level Name( 1, "Variable 5 Smooth", Item ID( "5", 1 ) ), Level Name( 2, "Variable 6 Smooth", Item ID( "6", 1 ) ), Properties( 0, {Line Color( 53 ), Line Width( 4 )}, Item ID( "3", 1 ) ), Properties( 1, {Line Color( 56 ), Line Width( 4 )}, Item ID( "5", 1 ) ), Properties( 2, {Line Color( 38 ), Line Width( 4 )}, Item ID( "6", 1 ) ), Level Name( -1, "Variable 4 Smooth", Item ID( "4", 1 ) ), Properties( -1, {Line Color( 13 ), Line Width( 4 )}, Item ID( "4", 1 ) ), Properties( -1, {Line Width( 4 )}, Item ID( "Smooth", 1 ) ) )} )

Aziza · ‎05-23-2019

Thank you, @julian, it worked fine! I learned smth new again!!! 😄

Aziza · ‎05-21-2019

Hi @julian , thank you for your help. I am a Windows user. I was able to create a "Beamer" form following your instructions. It was not obvious, since I am using Windows 10. Anyway, I can now choose it manually and set it up from the File Menu. The script is not responding though, when I use "Beamer". Do you know what am I doing wrong? Thank you. obj<< Set page setup(margins( 0.2, 0.4, 0, 0 ),scale( 0.75),portrait( 0 ), paper size( "Beamer" ));

Aziza · ‎05-21-2019

Thank you, @melaniedrake Melanie. I tried to avoid to send it as an attachment, since it will cause an extra action for the Email receivers, but I understand your point of view.

Aziza · ‎05-20-2019

Hi, I am trying to customize the page setup and change the paper size to save the Graph Builder output as PDF plots for using them in Beamer Slides. The size of a Beamer slide is 128mm by 96mm. I failed to use the function set page setup, since I think one can use only the sizes which are already specified. Are there any thoughts on how I could proceed this step? Many thanks!

Aziza · ‎05-17-2019

Hi everyone! Is there any way to include the tabulate output as the Email content? I would like something like this: dt = Open( "$SAMPLE_DATA/Big Class.jmp" ); dt = Open( "$SAMPLE_DATA/Big Class.jmp" ); tabResult = dt << Tabulate( Show Control Panel( 0 ), Show Shading( 0 ), Add Table( Row Table( Grouping Columns( :Name, :Age, :Height, :Weight ) ) ) ); // and include the tabResult as the content of the message: Mail( "test@example.com", "subject A", tabRresult ); Thank you very much!

Aziza · ‎02-27-2019

Thank you a lot for helping me to figure it out! This is exactly what I meant! 🙂

Aziza · ‎02-26-2019

Hi All, I have a script which generates Graph Builder Reports and I want to deactivate the "Automatic Fontsize" option. Is there such a function? Thank you!

Aziza · ‎02-06-2019

Thank you, Wendy.

Aziza · ‎02-05-2019

Hi all, I have a script for a "prompt" filter-based Query Builder. As soon as I run the script, a Query Prompts Window will appear (that's what is wished), but if I click the CANCEL button, it continues running the script which consequently brings to unnecessary data processing. Does anyone know how to terminate this process? Thank you for reading my post! 🙂

Aziza · ‎08-14-2018

Hi all, my script does some analysis and puts the output into a dashboard. As the next step, I want the script to save the dashboard in a different format, say PDF. I failed all my tries. I am using JMP 14 (not JMP Pro). I checked the post where smth similar was done with the help of Application Buildier in JMP Pro, but that seems not to be very useful in my case. I would appreciate very much if you share your thoughts. Thank you

Aziza · ‎04-23-2018

Thank you!

Aziza · ‎04-18-2018

Wow! this worked in one go! Thank you!!!

Aziza · ‎04-18-2018

Hi, I have three opened data tables defined by dt_pp, dt_pp_t, dt_final and I want to close them. My script contains the following lines: Close( dt_pp, No Save ); Close( dt_pp_t, No Save ); Close(dt_final, No Save); If I run the whole script, it closes the two first data tables and not the last one. But if I select this particular line and run it, it works and the table closes. What am I doing wrong/missing here? Thank you!

Aziza · ‎04-09-2018

fantastic! Thank you!

Aziza · ‎04-06-2018

Hi all, does any of you know how to comment out the portions of the script in JMP? Thank you!

Date Registered	‎01-23-2018 09:17 AM
Date Last Visited	yesterday
Total Messages Posted	25
Total Kudos Received	2

Online Status	Offline
Date Last Visited	yesterday