JMP User Community

Latest Discussions

No line break between some of the points in a time series plot

I have a series of measurements where in order I have position A, B, C, then again A, B, C and so on.Of interest is whether there is any tendency for values to be biggest/smallest at either A or C position. This is not the case - the fluctuations are just random.Now I'm thinking of how to present the outcome in a suitable graph.I would like to use a line break between each set when plotting the gr...
scottahindle

Discussions |
Dec 4, 2018 4:46 AM

6370 views | 3 replies
DOE - ELISA method - 4 PL modeling

Dear JMP Community, My question is about a DOE performed on ELISA method.The response is the Absorbance and there are 3 factors which are dilution of different reagents (standard, parameter B and parameter C) - Refer to graph attached to visualize the type of data I have.I’m looking for optimizing the three factors to get a plateau equal to 2 for absorbance. But I would like also to be at “the beg...
TBrisset

Discussions |
Dec 4, 2018 3:23 AM

9391 views | 5 replies
Non-parametric Mixed Model

Hi everyone, New to the forum. I've been using JMP for a while now and I have encountered my first problem. Maybe it's not a problem to any of you, but I don't know how to run a non-parametric test on a mixed model. My understanding through the fit model platform is that this is a parametric method. However, there is no way to transform my data. I have a response, y, a fixed factor, and a ra...
tylerg4

Discussions |
Dec 4, 2018 12:43 AM

2445 views | 1 replies
How to Translate JMP-where-clause from data filter to SQL-where-clause

Dear Community,I'd like to use the data filter object to let users filter some data to be queried from Oracle database via SQL.So I extracted a small part from data into a JMP table,and put a data filter over it.From Data Filter I can extract the where clause,it may look as follows:Select Where( (:PC == "A_PROCESS" | :PC == "C_PROCESS" | :PC == "D_PROCESS") & :TC == "01" & (:POS >= 25 & :POS <=...
Georg

Discussions |
Dec 3, 2018 9:35 AM

14717 views | 7 replies
Value labels

hi, I try to replace "0,00%" by empty space via JSL inside the column "RmG" I wrote this script: Column( dt, "RmG" ) << Value Labels( {"0%"}, {""} ); Column( dt, "RmG" ) << Use Value Labels( 1 ); but it doesn't work. Thanks for your help. best regards
Françoise

Discussions |
Dec 3, 2018 8:43 AM

6154 views | 3 replies

Previous
Next

Latest Discussions

DOE - ELISA method - 4 PL modeling

Dear JMP Community, My question is about a DOE performed on ELISA method.The response is the Absorbance and there are 3 factors which are dilution of different reagents (standard, parameter B and parameter C) - Refer to graph attached to visualize the type of data I have.I’m looking for optimizing the three factors to get a plateau equal to 2 for absorbance. But I would like also to be at “the beg...
TBrisset

Discussions |
Dec 4, 2018 3:23 AM

9391 views | 5 replies
Non-parametric Mixed Model

Hi everyone, New to the forum. I've been using JMP for a while now and I have encountered my first problem. Maybe it's not a problem to any of you, but I don't know how to run a non-parametric test on a mixed model. My understanding through the fit model platform is that this is a parametric method. However, there is no way to transform my data. I have a response, y, a fixed factor, and a ra...
tylerg4

Discussions |
Dec 4, 2018 12:43 AM

2445 views | 1 replies
How to abort script and show error message if save file fails?

Hi,I made a script that converts JMP to a csv file and saves it to network PCs using their IP address.dt = Current Data Table(); ToolID = {"G01", "G02", "G03", "G04"}; IP_add = {"10.87.123.456", "10.87.123.789", "10.87.456.789", "10.87.789.123"}; current_pref = Char( Arg( Parse( Char( Get Preferences( Export settings ) ) ), 1 ) ); Pref( Export Settings( End Of Field( Comma ), Export Table Headers(...
shaira

Discussions |
Nov 28, 2018 3:50 PM

10881 views | 5 replies
Logit Regression Help

I am trying to run a Logit Regression and it has to include a column called "validation" which is just one of two words (half the data points are word type, the other half are another) so it comes up on JMP as nominal. What do I do? Thanks. The data is attached, choice is the dependent and all of ther other variables should be the predictors (including validation column).
ryanstar123

Discussions |
Nov 27, 2018 5:51 PM

8589 views | 6 replies
transfer/share JSL with other code languages

Has anyone developed/found a way to convert/share/"compile" JSL into something usable by other languages? Here is my problem. As the developer of the initial code in R&D, I want a way to be able to give researchers code/tools that meet their needs and work with there existing analysis structure (JMP). However, some of these tools get merged into larger suites (for operations/QC, etc) where an exis...
nathan-clark

Discussions |
Nov 26, 2018 10:06 AM

5868 views | 3 replies

Previous
Next

Latest Discussions

I want to use LASSO and Group LASSO in JMP

I'm involved in a project where we are applying lasso to build a logistic regression model from a "black box" set of predictors. I need to get JMP Pro before trying out JMP's implementation. I'm doing all the analysis in R at present. Does JMP Pro also include group lasso? I've found through using JMP Cluster Variables (CLUSVAR) that I can naturally group my predictors prior to group lasso. F...
gene

Discussions |
Nov 2, 2018 7:43 AM

2597 views | 0 replies
Contingency table and mosaic plot are not same orientation

// For a contingency table report, swap the x and y // currently can swap the mosaic plot only Names Default to Here(1); dt = Open( "$SAMPLE_DATA/Big Class.jmp" ); myr = Contingency( Y( :Age ), X( :sex ) ); // Have to have a Contingency Analysis report open // Can add test to make sure it is open in the future myr = Current Report(); // taking apart CrossTabBox was easier using XML than JSL...
Vball247

Discussions |
Oct 29, 2018 2:18 PM

3253 views | 0 replies
how to change the type and color of lines in graph

I am trying to show line of fit in graph builder for several sets of data. The data table have many columns, I want to show the column(i) vs column(1).Every column can be grouped by A1 & a, also can be grouped by B1 & b, but except column(1). The follow is the chart about column(2) vs column(1): I use the follow script to change the type of lines:Dispatch( {}, "400", ScaleBox, {Legend Model( 8,...
Yu

Discussions |
Sep 25, 2018 2:34 AM

3680 views | 0 replies
Mean separation letter from test slices

Hello!

How do I get the mean separation letter in for each level of a factor when interaction is significant? For example, if I have A*B interaction and I want to get the mean separation of B at each level of A, how do I get the LSD letters in JMP? I can do test slices and that will use the DF of the full analysis, but this does not shows which mean of B differs. If I do multiple comparison: How ca...
jfranc19

Discussions |
Sep 14, 2018 2:35 PM

2514 views | 0 replies
repeated-measures ANCOVA: How to perform the analysis when the parallel slope assumpt. doesn't meet?

Hi all,I need to perform the ANCOVA for a repeated-measures design. I tried to adapt the Julian's ANCOVA procedure showed on the https://www.youtube.com/watch?v=mApbp1RDy-U to my study case (repeated-measures design). Initially, I did the following actions: 1. In the Fit Y by X dialogue: I selected VAR_Y as "Y, Response" and VAR_X as "X, Factor";2. For "Group by" I selected the variable Timepoint;...
Reinaldo

Discussions |
Jun 18, 2018 6:31 AM

3511 views | 0 replies