JMP User Community

Latest Discussions

some experiments failed, what next can be done

Hello:I was working on a university project and performed a 3 factor (A, B, C) DOE, where 2 factors (A & C) had 3 levels and 1 factor (B) had 2 levels. All the factors were continuous. In total 18 experiments were done. Two experiments failed and I came to know this only after the tests were done (the outcome is not as expected, it seems that the combination of lower level of A and lower level of ...
VarunK

Discussions |
Aug 21, 2023 9:02 AM

1983 views | 4 replies
Graph Builder Combined Scale (Merged)

I need to represent four different responses (Y) in a combined way.
Y1 ranged from 170 to 300 nm,
Y2 ranged from 270 to 1200 nm,
Y3 ranged from 400 to 2500 nm,
Y4 ranged from 0.9 to 4.0. When combined, the Y-axis ranged from 0 to 80. Is that correct?What is the explanation for this change? Is there any way to manipulate the Y-axis values?
AIOSM

Discussions |
Aug 21, 2023 8:47 AM

733 views | 1 replies
DOE - How to handle uncontrolled factors directly affected by other factors using custom DOE

I am fairly novice to this stuff so I will define the situation. Please share your thoughts on the situation. I have two factors (Inputs A, B) that individually and directly affect factors C and D (Measurements). Increasing either A, or B leads to an increase in C and D. The issue is that currently, I am trying to decouple the benefits of A and B from C and D. I attempted an RSM DOE where I left C...
MetaLizard62080

Discussions |
Aug 21, 2023 6:51 AM

2304 views | 5 replies
Creation of a DoE

Dear Sir/Madam, For an optimization study my team wants to use JMP to create a DoE design that maximizes output and minimizes the amount of experiments. We have 3 continuous variables (duration; velocity; volume) that have two levels each. To my limited knowledge a Full Factorial DoE would require 2^3 = 8 experiments. Is there a possibility to create a DoE design that requires less than 8 experime...
Biotech1

Discussions |
Aug 21, 2023 3:42 AM

823 views | 1 replies
How to plot fit Y by X plot automatically from many columns

try to plot many fit by x plots and find the RSquare from each linear fit. How can I do it at once? (make all plots and do the linear fit at once)1. select item to plot: A-1 vs B-1, A-2 vs B-2 ... etc. 2. Linear fit and find the RSquare 3. create the heat map
daily_learn

Discussions |
Aug 20, 2023 10:07 AM

2422 views | 6 replies

Previous
Next

Latest Discussions

Graph Builder Combined Scale (Merged)

I need to represent four different responses (Y) in a combined way.
Y1 ranged from 170 to 300 nm,
Y2 ranged from 270 to 1200 nm,
Y3 ranged from 400 to 2500 nm,
Y4 ranged from 0.9 to 4.0. When combined, the Y-axis ranged from 0 to 80. Is that correct?What is the explanation for this change? Is there any way to manipulate the Y-axis values?
AIOSM

Discussions |
Aug 21, 2023 8:47 AM

733 views | 1 replies
DOE - How to handle uncontrolled factors directly affected by other factors using custom DOE

I am fairly novice to this stuff so I will define the situation. Please share your thoughts on the situation. I have two factors (Inputs A, B) that individually and directly affect factors C and D (Measurements). Increasing either A, or B leads to an increase in C and D. The issue is that currently, I am trying to decouple the benefits of A and B from C and D. I attempted an RSM DOE where I left C...
MetaLizard62080

Discussions |
Aug 21, 2023 6:51 AM

2304 views | 5 replies
Creation of a DoE

Dear Sir/Madam, For an optimization study my team wants to use JMP to create a DoE design that maximizes output and minimizes the amount of experiments. We have 3 continuous variables (duration; velocity; volume) that have two levels each. To my limited knowledge a Full Factorial DoE would require 2^3 = 8 experiments. Is there a possibility to create a DoE design that requires less than 8 experime...
Biotech1

Discussions |
Aug 21, 2023 3:42 AM

823 views | 1 replies
How to plot fit Y by X plot automatically from many columns

try to plot many fit by x plots and find the RSquare from each linear fit. How can I do it at once? (make all plots and do the linear fit at once)1. select item to plot: A-1 vs B-1, A-2 vs B-2 ... etc. 2. Linear fit and find the RSquare 3. create the heat map
daily_learn

Discussions |
Aug 20, 2023 10:07 AM

2422 views | 6 replies
JMP action recording

Hi when try to record the action:1. plot x by y2. fit linear3. put density ellipse only step1 plot x-y scrip is shown in the log. how to also record the actions done in the report? Thank you
daily_learn

Discussions |
Aug 20, 2023 9:35 AM

860 views | 1 replies

Previous
Next

Latest Discussions

How to prove that the composition of the chemical mixture before and after treatment is significantly different?

Hello! I need to show that compositions of chemical mixture before and after treatment are significantly different. Composition is given in weight %, so the total of all components' weight % in the mixture is 100%. This also means that if one component weight % in the mixture decreased after treatment all other component weight % should be increased. Can I use "Test Mean" from the Distribution pla...
konstantin

Discussions |
Aug 18, 2023 2:14 PM

723 views | 0 replies
How I Apply the deep learning models RNN and LSTM in JMP pro

I want to apply deep learning models in JMP pro, but unfortunately I can't fine any option in JMP pro, Please guide me how I can apply it into JMP pro (if it is available), if not, is there any add in?
qreza110

Discussions |
Aug 16, 2023 10:46 AM

979 views | 0 replies
Robust Fit Outliers - different row set selected and excluded as outliers

Dear community,I have a stacked data table, and want to exclude outliers by a Label (e.g. an element for some measurements).In the robust fit outlier platform I can detect outliers and than can select or exclude corresponding rows.For my understanding, rows that are selected than or excluded, should be exactly the same ones.And that is the case for the below sample data table used in the JSL below...
Georg

Discussions |
Aug 16, 2023 2:40 AM

868 views | 0 replies
Two-way repeat measures ANOVA - data are not normally distributed

I read the previous posts on the two-way repeat measures ANOVA - Multivariate or univariate analysis, and the full factorial mixed model add-in. Now I have two questions: 1) When the data are not normally distributed, would these methods be still valid for the analysis? Any non-parametric analysis on JMP? I noticed that R programming may have certain packages to provide solutions, but I am not a...
HYang

Discussions |
Aug 14, 2023 1:52 PM

812 views | 0 replies
Graph Builder - Summary Statistics - select aggregation column?

Points plot in Graph builder provides an option to calculate summary statistics.By default, points with same x value are aggregated into one value. Is there an option to select another column to specify groups of point which get aggregated?e.g. to display the median height/weight for different ages - with one click. Names Default to Here(1); dt = Open( "$SAMPLE_DATA/Big Class.jmp" ); Graph Builde...
hogi

Discussions |
Aug 10, 2023 2:23 AM

1094 views | 0 replies