Welcome to the JMP User Community!
Ask questions, get answers, meet other JMP usersLearning Resources
Find courses, tutorials, and lots of other methods of learning JMP.
view all learning resourcesLatest Discussions
-
How to create a workflow that can run a set of analyses for multiple files in one folder
Hi, I would like to use a workflow to run the same set of analyses on multiple .csv files saved in a folder. I know how to create a workflow for a specific .csv file, but I don't know how to create a workflow to run the set of analyses on a list of .csv files. My JSL skill is limited. I appreciate your help.Margaret
mdeng
343 views | 6 replies -
Using JMP to Optimize Agricultural Production
I saw online the following info for a session that covered the topic "Using JMP to Optimize Agricultural Production". It was posted by HydeMiller
(Staff person) on Aug 26, 2020.There was a link to watch a video recording of this event, which didn't point to a recording. Does anyone know where I could find this recording, or any similar webinar? Thanks,Christos JMP has many capabilities to analyze ...ChrisRegenAg
205 views | 1 replies -
Using JMP 16 to build a predictive model
Hi everyone,I am a PhD student. One of my research plans is to build a predictive model for erosion rate. Erosion rate is the dependent variable and (the impact angle, impact velocity, solid content, material hardness, and particle diameter) are the independent variables. I just installed JMP 16, and I do not have that much experience with it. I am asking if it is possible to use this software t...
AliAl-Darraji
372 views | 5 replies -
How to use Words function to extract only specific elements from string
Suppose I have a string of characters with common delimiter in a form of bal1_bla2_blbla3_blabla4And I would like to create a new column that contains only "blbla3_blabla4", how can I apply words function for that?
VM04
199 views | 2 replies -
Spec Limit and Pass/Fail Column
Hi, I would like to ask if I set a particular column with spec limit(eg. low:100 and max:1000), from this limit set how can I create a corresponding column say Pass/Fail column to label those data within limit as Pass and out of spec as Fail.Thank you.
adam
5450 views | 2 replies
Latest Discussions
-
Using JMP to Optimize Agricultural Production
I saw online the following info for a session that covered the topic "Using JMP to Optimize Agricultural Production". It was posted by HydeMiller
(Staff person) on Aug 26, 2020.There was a link to watch a video recording of this event, which didn't point to a recording. Does anyone know where I could find this recording, or any similar webinar? Thanks,Christos JMP has many capabilities to analyze ...205 views | 1 replies -
Sample size explorer : How to access programmatically
I would like to access and edit different components/fields(text fields) of sample size explorer programmatically. I want to build a custom script where my user interface(much simple with some default values) will ask user similar numbers/options to enter. that user interface should connect to sample size explorer platform and return me outputs. How can I do that. below are highlighted components ...
princeshiva
299 views | 4 replies -
Add adjusted testnumber column.
I am not sure this is even possible. I do have test time stamp but they are not accurate. I like to add a test number column, but for the retested parts i want test number 2 not 1.
ConfidenceOwl94
337 views | 5 replies -
Correct use of a mixture design for formulation optimisation
Hey, I'm a chemist trying to optimise three components in a formulation but have some limitations on them. All 3 = max 20% of formulationA = 0.5 - 10%B = 0 - 5%C = 0 - 5%B + C = min 2.5 % However, they don't all need to add to 20% e.g. can have an experiment with 0.5% A, 0% B, 0% C and then can balance with X. I've used a mixed design for this.A, mixture, 0.025, 0.5B, mixture, 0, 0.25C, mixture, ...
DeepDormouse199
166 views | 1 replies -
Evaluating a Design Matrix for aliasing(confounding) in R and JMP have different answers
I have a design matrix , columns are factors with 2 levels, rows are experiments, see pics. I want to evaluate the design for aliasing (also called confounding). I obviously want a design that is free of confounding. I thought as part of doing this i would take XT * X of my design to get the dot products across each column. If there is no confounding id expect 0 in every off diagonal term. When y...
denalitastic
568 views | 6 replies
Latest Discussions
-
Question About F-Tests in GLMMs with Binomial Errors
Hi,
I have a question regarding Generalized Linear Mixed Models (GLMMs) in JMP pro. Most statisticians consider it inappropriate to use F-tests or t-tests to evaluate predictor contributions in GLMs or GLMMs with binomial errors. This is because F- and t-tests are based on sums of squares, which assume normally distributed residual errors.
While using a logit link function helps linearize the relati...LanaMilana
355 views | 0 replies -
How to adjust the size of R plot imported with get R graphics(); ?
I'm trying to run R code in JMP to create a plot. I succeeded in importing the plot in png format, but failed to adjust the size of the plot. I can adjust the "plot_from_R" in png format with the set size(); function in jsl, but it is not proportional and distorted. How can I import plot_from_R in the size I want?
R Init(); R Submit( "\[ windows(300,100) #it doesn't work plot(function(x) dnorm(...CountableModel1
312 views | 0 replies -
Exceptions are the utilities Show, Write, and Print ...
from: https://www.jmp.com/support/help/en/18.1/?os=win&source=application#page/jmp/advanced-expressions-macros-and-lists.shtml# If you assign the expression x+y to a, quoting it as an expression with Expr, then whenever a is evaluated, it evaluates the expression using the current values of x and y and returns the result.
Exceptions are the utilities Show, Write, and Print, which do not evaluate e...hogi
303 views | 0 replies -
Extract Expr: Issue with scoped variable
This works:
Extract Expr(:height << set name( "new" ), :height );But this one doesn't *):Extract Expr(myDataTable:height << set name( "new" ), myDataTable:height );Fortunately there is this dirty trick of Extract Expr (it automatically resolves every defined variable **) - which allows this workaround:x = Expr( myDataTable:height); Extract Expr(myDataTable:height << set name( "new" ), x )*) why...246 views | 0 replies
beimar_iriarte_JMP Events
-
ChinaShanghai May 29
-
12:00PM - 1:00PM EDTMar 20JMP for Teaching Data Analytics Courses
REGISTER HERE: https://www.jmp.com/en_us/events/live-webinars/academic/jmp-for-data-analytics-course...
-
1:00PM - 2:00PM EDTMar 21Getting Started with JMP
New JMP users will learn how to: Easily navigate JMP using the JMP Starter. Import all types o...
-
1:00PM - 2:30PM EDTMar 26Jump into Gauge Studies: Hands-On Workshop
Jump into Gauge Studies Wednesday, March 26 | Live Web Workshop1:00 p.m. – 2:30 p.m. ET Hoste...
-
1:00PM - 3:30PM MDTMar 27In-Person Colorado JMP Users Group Meeting
Seats are limited to 30 attendees, so register now to save your spot. Date: M...
