JMP User Community

Latest Discussions

Simulation Experiment

I used prediction profiler to find parameters to maximize desirability, then simulated to table. Then I was taught in a JMP class to "use TLC drop down toolbar, click Edge of Failure script". I think it might be from an add-on, but I don't know how to get there again. This I was taught to use to narrow Factors until I get below a certain OOS failure rate. It's a nice feature and visual graph, but ...
evtran

Discussions |
Oct 31, 2023 6:20 AM

1167 views | 1 replies
DOE - Augment Design to Focus on More Narrow Range

Hi, Question: Is there a way, to add runs to a DOE (Augment Design), which adds a focused range of a factor. This way you can evaluate a wider range, and also focus on the expected optimal range based on prior knowledge. Ex. 25 runs with a factor(A) of 0-100 + 5 runs with factor(A) of 0-30 Background:I have created a definitive screening design which ranges my factors very wide. I have prior knowl...
MetaLizard62080

Discussions |
Oct 27, 2023 2:24 AM

2728 views | 4 replies
How to adjust the factor range for specific factors within an ongoing DOE

Hi, I designed a DOE that has two independent buffers. This DOE will range components in each buffer which will be used in a processing step sequentially. IE, buffer A, followed by buffer B. We already prepared for the DOE, and formulated the A buffers as per the recommended design. For the B buffers, we intended on ranging 2 components but later decided to reduce to ranging one component, and als...
MetaLizard62080

Discussions |
Oct 26, 2023 5:25 PM

762 views | 0 replies
How to create a side by side boxplot with data input as centered dots?

I'm trying to create a boxplot showing analysis data from different stations (placed on x- axis). When choosing plain boxes without the individual data shown as dots, it looks fine with the boxes within the same station placeded side to side. But when trying to add the dots, they are either displayed on the side of the boxes (some dots from different analyses overlap) or the boxes are overlapping,...
LoglinearSpaces

Discussions |
Oct 26, 2023 11:29 AM

6091 views | 6 replies
Functional Design of Experiments - Categorical factors

Hello,Should I use the Functional Design of Experiments in the Functional Data Explorer platform with categorical factors?I've performed a full factorial DoE with 2 categorical factors and 1 continuous factor (3 levels). My response is a curve (%yield vs three-time points). Should I use the Functional Data Explorer in this case? Thank you very much!
sofiasousa24

Discussions |
Oct 26, 2023 3:32 AM

2213 views | 3 replies

Previous
Next

Latest Discussions

Simulation Experiment

I used prediction profiler to find parameters to maximize desirability, then simulated to table. Then I was taught in a JMP class to "use TLC drop down toolbar, click Edge of Failure script". I think it might be from an add-on, but I don't know how to get there again. This I was taught to use to narrow Factors until I get below a certain OOS failure rate. It's a nice feature and visual graph, but ...
evtran

Discussions |
Oct 31, 2023 6:20 AM

1167 views | 1 replies
DOE - Augment Design to Focus on More Narrow Range

Hi, Question: Is there a way, to add runs to a DOE (Augment Design), which adds a focused range of a factor. This way you can evaluate a wider range, and also focus on the expected optimal range based on prior knowledge. Ex. 25 runs with a factor(A) of 0-100 + 5 runs with factor(A) of 0-30 Background:I have created a definitive screening design which ranges my factors very wide. I have prior knowl...
MetaLizard62080

Discussions |
Oct 27, 2023 2:24 AM

2728 views | 4 replies
How to adjust the factor range for specific factors within an ongoing DOE

Hi, I designed a DOE that has two independent buffers. This DOE will range components in each buffer which will be used in a processing step sequentially. IE, buffer A, followed by buffer B. We already prepared for the DOE, and formulated the A buffers as per the recommended design. For the B buffers, we intended on ranging 2 components but later decided to reduce to ranging one component, and als...
MetaLizard62080

Discussions |
Oct 26, 2023 5:25 PM

762 views | 0 replies
How to create a side by side boxplot with data input as centered dots?

I'm trying to create a boxplot showing analysis data from different stations (placed on x- axis). When choosing plain boxes without the individual data shown as dots, it looks fine with the boxes within the same station placeded side to side. But when trying to add the dots, they are either displayed on the side of the boxes (some dots from different analyses overlap) or the boxes are overlapping,...
LoglinearSpaces

Discussions |
Oct 26, 2023 11:29 AM

6091 views | 6 replies
DOE in mixture design with mixture in mixture approach

Greetings to allWishing this reaches all well, thanking all for the help and suggestionsI had been involves in a research project relating to develop a mixture and was introduced to DOE in JMP and did a basic learning on the software but I am finding it hard to develop doe for the purpose of experimental test. the details of the application in my case is follows. the property responses that I want...
ControlLizard61

Discussions |
Oct 24, 2023 7:43 AM

1641 views | 1 replies

Previous
Next

Latest Discussions

How to adjust the factor range for specific factors within an ongoing DOE

Hi, I designed a DOE that has two independent buffers. This DOE will range components in each buffer which will be used in a processing step sequentially. IE, buffer A, followed by buffer B. We already prepared for the DOE, and formulated the A buffers as per the recommended design. For the B buffers, we intended on ranging 2 components but later decided to reduce to ranging one component, and als...
MetaLizard62080

Discussions |
Oct 26, 2023 5:25 PM

762 views | 0 replies
Discrete Choice Experiment: Prohibited Combination

Hi everyone,I would like to design my first DCE. I am going to use 6 attributes that differ in the levels from 2 to 4 levels. However, I have a limitation where there is an impossible combination that may appear; for example, the cheapest product would not be possible to have the best feature. Is there any way for me to select the prohibited combination? Or, is the D-optimal design will always cal...
andikawp

Discussions |
Sep 6, 2023 7:11 AM

839 views | 0 replies
49 factor dsd design

When designing dsd with 49 factors and 4 additional runs. Why do I get 109 runs and not 105 runs?
ConditionalRam9

Discussions |
Jul 22, 2023 7:29 AM

670 views | 0 replies
Main Menu("command") - return value?

If I open a file via open("filename"), the command returns a reference to the data table which can be used as dt = open("filename");If I trigger open viadt = Main Menu("open")it doesn't return a reference to the data table. In general, is there a way, when triggering a command from the Main Menu, to get the return value?e.g. a reference to a data table for a user defined file loader - or an error ...
hogi

Discussions |
Jun 7, 2023 8:42 AM

747 views | 0 replies
how to read the output from Johnson-Neyman plot and floodlight analyisis?

hi,I have got an add-in from https://community.jmp.com/t5/JMPer-Cable/Who-what-why-and-how-Tools-for-modeling-and-visualizing/bc-p/624293#M842 to implement floodlight analysis through Johnson-Neyman Plot. according to the table of the example from the linkage above; what does "_c" mean? such as "meaning_c" and overwhelming_c"? focus on my own study, I got a moderator called "SE" which is a contin...
Rongyu_Kuang

Discussions |
Apr 23, 2023 8:56 AM

1386 views | 0 replies