JMP User Community

Latest Discussions

Karkey : How do I use formulas for a single cell instead of an entire column?

Hii, Mukesh Karkey here ,I'm new to JMP and used to working in Excel. How can I apply a formula to only a single cell instead of the entire column? I need to calculate a value for just one row in my data table without affecting the others. Regards, Mukesh Karkey
mukeshkakkey

Discussions |
Sep 10, 2025 12:35 PM

2292 views | 5 replies
Tabulate Page Column item specified from for loop

Hello all, I am trying to tabulate multi cases based on a specific column value in for loop. categorizes = Column(dt, "Categorize"); columnValues = Associative Array(categorizes << Get Values) << Get Keys; For(i = 1, i <= N Items(columnValues), i++, currentItem = columnValues[i]; obLoopY = Outline Box("categorize" || Char(currentItem), dt << Tabulate( Page Column(:Categorize(Char(cur...
DarkWinter

Discussions |
Sep 10, 2025 11:40 AM

1349 views | 2 replies
How to Replace Original Points with Contour When Using Add Element in JSL Graphs

The JSL code below attempts to use the add Element method to display a Contour plot on the graph on the right side. However, because add Element is an Add Element operation, it cannot remove or replace the original Points format on the right-side graph, resulting in the generated image being different from the figure below. The original Points remain along with the added Contour. Since the X-axis ...
BabyDoragon

Discussions |
Sep 10, 2025 8:48 AM

1517 views | 3 replies
Opening Journal, opens a new JMP window

Wondering if this is a setting-specific, or JMP thing... Example: I have JMP open, have been using it, etc., and I go to open a Journal that I have made, it will open a new JMP window, so now i have two JMP's open, instead of opening in the JMP that already IS open. Is there a setting I need to update?? It drives me insane because it never used to happen to me. Using JMP 18 FWIW. Thank...
kwmcm

Discussions |
Sep 10, 2025 1:50 AM

1282 views | 2 replies
How many devices can open JMP simultaneously using one account?
TIP_USER

Discussions |
Sep 9, 2025 10:47 PM

874 views | 1 replies

Previous
Next

Latest Discussions

Karkey : How do I use formulas for a single cell instead of an entire column?

Hii, Mukesh Karkey here ,I'm new to JMP and used to working in Excel. How can I apply a formula to only a single cell instead of the entire column? I need to calculate a value for just one row in my data table without affecting the others. Regards, Mukesh Karkey
mukeshkakkey

Discussions |
Sep 10, 2025 12:35 PM

2292 views | 5 replies
Opening Journal, opens a new JMP window

Wondering if this is a setting-specific, or JMP thing... Example: I have JMP open, have been using it, etc., and I go to open a Journal that I have made, it will open a new JMP window, so now i have two JMP's open, instead of opening in the JMP that already IS open. Is there a setting I need to update?? It drives me insane because it never used to happen to me. Using JMP 18 FWIW. Thank...
kwmcm

Discussions |
Sep 10, 2025 1:50 AM

1282 views | 2 replies
JMP18 Excel Save Behavior

Hello Community! When saving a table of character columns as an xlsx Excel file, JMP18 adds some kind of invisible flag that makes Excel think it is has numbers stored as text. This is a different behavior than JMP17 and is causing data interpretation issues on downstream non-JMP scripts that use this Excel file. Any advice on how to work around this or change this behavior? I cannot change the co...
obstruksion

Discussions |
Sep 9, 2025 9:58 AM

1128 views | 2 replies
Can I change the confidence intervals in the Easy DOE profiler? It's currently set at 95%, but I would like to change it to 90%.
JohnCunningham

Discussions |
Sep 9, 2025 7:17 AM

1007 views | 1 replies
How to Exclude Random Missing point before performing PCA.

Hi, How to exclude missing values from the dataset before analysis. These are random missing values due to instrument malfunction. I don't want to impute my data. I have explored the 'Explore Missing Value' but that didn't help because that changes the interpretation of my PCA results. Is there any other way to do so? Thank you, Beginner_9
Beginner_9

Discussions |
Sep 9, 2025 6:48 AM

2705 views | 6 replies

Previous
Next

Latest Discussions

STATS on recurrence analysis, loglinear NHPP model

Hi, I am new to recurrence analysis and JMP.
I did the analysis and use loglinear NHPP model. I have a little trouble understanding the results (in attached image). It seems that the γ and δ values are listed in the Effect Marginals section of the result. If I want to do stats on gamma compared between two groups (AlphaC and Sym 1.0). How do I do that? JMP is not generating a p value so I want to d...
Caozheng0115

Discussions |
Aug 28, 2025 9:22 AM

809 views | 0 replies
permutation test for PLS-DA

Hi all! I've run a PLS-DA test for a data set that consists of FTIR spectral data of 5 different systems under 5 different treatments. I've used the fit model platform so that I could handle categorical variables in my Y variables. According to PRESS statistics, this model has an optimum number of factors of 7 and possesses good discriminating power between my samples. Then, I noticed that the st...
Mariana_Aguilar

Discussions |
Aug 20, 2025 8:45 PM

2799 views | 0 replies
How to assign columns to 'Cause' and 'Grouping' roles, 'scale' and 'shape' effect in JMP recurrence analysis

Hi, all
I am a new member to the community. I am assigned a task to perform recurrence analysis on our data. I never used JMP or did any recurrence analysis. So I will bring some stupid questions for sure.
The data we have are robots repair. We want to see repairs event pattern for the bots and I was told to use recurrence analysis (don't know why). So we have around 15000 robots, I used the 'bot_id...
Caozheng0115

Discussions |
Aug 8, 2025 10:42 AM

1014 views | 0 replies
Customer quantile

Hello, looking for the upper and lower cut off of exponential distribution and Weibull distribution, I could find custom quantile to designate the probability. Have a couple questions. In the old jump version, saw it quantile feature allowing probability number to type, it is the same as custom quantile in JUMP 17. Seems like there is confidence level set as default value of 0.95, having trie...
SignalRaccoon27

Discussions |
Aug 8, 2025 7:25 AM

652 views | 0 replies
Regarding the "Model Sensitivity Profiler" in "Constant Stress ALT Design". The pre-estimated values have been set in the "Acceleration Model settings", and these set values cannot be modified. Besides, the values of "Approx. Fail Time for Setting 1" and "Approx. Fail Time for Setting 2" in the "Mod

May I ask a question: Regarding the "Model Sensitivity Profiler" in "Constant Stress ALT Design". The pre-estimated values have been set in the "Acceleration Model settings", and these set values cannot be modified. Besides, the values of "Approx. Fail Time for Setting 1" and "Approx. Fail Time for Setting 2" in the "Model Sensitivity Profiler" are also unchangeable. What is the significance of th...
Rily_Maya

Discussions |
Jul 15, 2025 6:14 PM

835 views | 0 replies

Previous
Next

Welcome to the JMP User Community!

Learning Resources

Latest Discussions

Karkey : How do I use formulas for a single cell instead of an entire column?

Tabulate Page Column item specified from for loop

How to Replace Original Points with Contour When Using Add Element in JSL Graphs

Opening Journal, opens a new JMP window

How many devices can open JMP simultaneously using one account?

Latest Discussions

Karkey : How do I use formulas for a single cell instead of an entire column?

Opening Journal, opens a new JMP window

JMP18 Excel Save Behavior

Can I change the confidence intervals in the Easy DOE profiler? It's currently set at 95%, but I would like to change it to 90%.

How to Exclude Random Missing point before performing PCA.

Latest Discussions

STATS on recurrence analysis, loglinear NHPP model

permutation test for PLS-DA

How to assign columns to 'Cause' and 'Grouping' roles, 'scale' and 'shape' effect in JMP recurrence analysis

Customer quantile

Regarding the "Model Sensitivity Profiler" in "Constant Stress ALT Design". The pre-estimated values have been set in the "Acceleration Model settings", and these set values cannot be modified. Besides, the values of "Approx. Fail Time for Setting 1" and "Approx. Fail Time for Setting 2" in the "Mod

JMP Events

Teaching Statistical Thinking with JMP Student Edition: A classroom-ready analytics tool