Choose Language Hide Translation Bar
Community Trekker

## Custom design DOE with disallowed combinations - JMP 11

Hello,

i made a Custom Design DOE (Jmp 11) according to the following code snippet (There are a many german names in it). As you can see there are a lot of disallowed combinations.

DOE(

Custom Design,

{Add Response( Maximize, "Ziehtiefe", ., ., . ),

Add Factor( Continuous, 500, 9000, "Faltenhalterkraft", 0 ),

Add Factor(

Categorical,

{"St20kon_ZBrad", "St20kon_ZB_lon", "St30kon_ZBrad", "St30kon_ZBlon",

"St20ger_ZBrad", "St20ger_ZBlon", "St30ger_ZBrad", "St30ger_ZBlon"},

"Sonotrodenkombination",

0

), Add Factor(

Discrete Numeric,

{0.57, 0.68, 0.88, 0.96, 1.02, 0.73, 0.87, 1.13, 1.23, 1.31},

"Ziehspaltverhältnis",

0

), Add Factor( Continuous, 0, 0.15, "Kartonfeuchte", 0 ),

Add Factor( Continuous, 50, 100, "US-Amplitude", 0 ),

Add Factor( Continuous, 5, 200, "Tiefziehgeschwindigkeit", 0 ),

Set Random Seed( 1561028211 ), Number of Starts( 2 ), Add Term( {1, 0} ),

Add Term( {1, 1} ), Add Term( {2, 1} ), Add Term( {3, 1} ),

Add Potential Term( {3, 2} ), Add Potential Term( {3, 3} ),

Add Potential Term( {3, 4} ), Add Potential Term( {3, 5} ), Add Term( {4, 1} ),

Add Term( {5, 1} ), Add Term( {6, 1} ), Set Sample Size( 32 ),

Disallowed Combinations(

Sonotrodenkombination == 1 & Ziehspaltverhältnis == 6 |

Sonotrodenkombination == 1 & Ziehspaltverhältnis == 7 |

Sonotrodenkombination == 1 & Ziehspaltverhältnis == 8 |

Sonotrodenkombination == 1 & Ziehspaltverhältnis == 9 |

Sonotrodenkombination == 1 & Ziehspaltverhältnis == 10 |

Sonotrodenkombination == 3 & Ziehspaltverhältnis == 6 |

Sonotrodenkombination == 3 & Ziehspaltverhältnis == 7 |

Sonotrodenkombination == 3 & Ziehspaltverhältnis == 8 |

Sonotrodenkombination == 3 & Ziehspaltverhältnis == 9 |

Sonotrodenkombination == 3 & Ziehspaltverhältnis == 10 |

Sonotrodenkombination == 5 & Ziehspaltverhältnis == 6 |

Sonotrodenkombination == 5 & Ziehspaltverhältnis == 7 |

Sonotrodenkombination == 5 & Ziehspaltverhältnis == 8 |

Sonotrodenkombination == 5 & Ziehspaltverhältnis == 9 |

Sonotrodenkombination == 5 & Ziehspaltverhältnis == 10 |

Sonotrodenkombination == 7 & Ziehspaltverhältnis == 6 |

Sonotrodenkombination == 7 & Ziehspaltverhältnis == 7 |

Sonotrodenkombination == 7 & Ziehspaltverhältnis == 8 |

Sonotrodenkombination == 7 & Ziehspaltverhältnis == 9 |

Sonotrodenkombination == 7 & Ziehspaltverhältnis == 10 |

Sonotrodenkombination == 2 & Ziehspaltverhältnis == 1 |

Sonotrodenkombination == 2 & Ziehspaltverhältnis == 2 |

Sonotrodenkombination == 2 & Ziehspaltverhältnis == 3 |

Sonotrodenkombination == 2 & Ziehspaltverhältnis == 4 |

Sonotrodenkombination == 2 & Ziehspaltverhältnis == 5 |

Sonotrodenkombination == 4 & Ziehspaltverhältnis == 1 |

Sonotrodenkombination == 4 & Ziehspaltverhältnis == 2 |

Sonotrodenkombination == 4 & Ziehspaltverhältnis == 3 |

Sonotrodenkombination == 4 & Ziehspaltverhältnis == 4 |

Sonotrodenkombination == 4 & Ziehspaltverhältnis == 5 |

Sonotrodenkombination == 6 & Ziehspaltverhältnis == 1 |

Sonotrodenkombination == 6 & Ziehspaltverhältnis == 2 |

Sonotrodenkombination == 6 & Ziehspaltverhältnis == 3 |

Sonotrodenkombination == 6 & Ziehspaltverhältnis == 4 |

Sonotrodenkombination == 6 & Ziehspaltverhältnis == 5 |

Sonotrodenkombination == 8 & Ziehspaltverhältnis == 1 |

Sonotrodenkombination == 8 & Ziehspaltverhältnis == 2 |

Sonotrodenkombination == 8 & Ziehspaltverhältnis == 3 |

Sonotrodenkombination == 8 & Ziehspaltverhältnis == 4 |

Sonotrodenkombination == 8 & Ziehspaltverhältnis == 5

), Optimality Criterion( 1 ), Make Design}

)

This script produces following table:

Why does it pair combinations that I explicitly told it to avoid? I have marked two (of many more) in red.

Thank you for your help.

4 REPLIES 4
Highlighted
Community Trekker

## Re: Custom design DOE with disallowed combinations - JMP 11

I already tried ordering the discrete numeric factor "Ziehspaltverhältnis" in ascending order & "dropping all the two-way interactions that involve the two factors being disallowed like it is suggested here: Disallowed combination troubleshoot in Jmp 8.0

But it still doesn't work.

Staff (Retired)

## Re: Custom design DOE with disallowed combinations - JMP 11

Did you try to see if it works if you change your discrete numeric to a categorical factor just to see if that helps?

Community Trekker

## Re: Custom design DOE with disallowed combinations - JMP 11

It works! First of all when you want to exclude a discrete numeric factor you mustn't write the ordinal but the real value. And secondly, I changed the disallowed combinations when the design was already finished and then wondered why the table wasn't affected.

But thank you anyway for your troubles, lou

Staff

## Re: Custom design DOE with disallowed combinations - JMP 11

I was just writing a response and looks like you figured it out! You're correct, that discrete numeric needs the real value, since disallowed combinations treats it as a continuous variable (for other readers of this, see the script below). Depending on the model and optimality critrerion you choose, you may find that not all the values are used with discrete numeric, since the design is more efficient. You'll likely see better balance of that discrete numeric factor if you treat it categorical, but will be harder to pick up the main effect if you analyze the data with that factor as continuous.

Cheers,

Ryan

DOE(

Custom Design,

{Add Response( Maximize, "Ziehtiefe", ., ., . ),

Add Factor( Continuous, 500, 9000, "Faltenhalterkraft", 0 ),

Add Factor(

Categorical,

{"St20kon_ZBrad", "St20kon_ZB_lon", "St30kon_ZBrad", "St30kon_ZBlon",

"St20ger_ZBrad", "St20ger_ZBlon", "St30ger_ZBrad", "St30ger_ZBlon"},

"Sonotrodenkombination",

0

), Add Factor(

Discrete Numeric,

{0.57, 0.68, 0.88, 0.96, 1.02, 0.73, 0.87, 1.13, 1.23, 1.31},

"Ziehspaltverhältnis",

0

), Add Factor( Continuous, 0, 0.15, "Kartonfeuchte", 0 ),

Add Factor( Continuous, 50, 100, "US-Amplitude", 0 ),

Add Factor( Continuous, 5, 200, "Tiefziehgeschwindigkeit", 0 ),

Set Random Seed( 1561028211 ), Number of Starts( 2 ), Add Term( {1, 0} ),

Add Term( {1, 1} ), Add Term( {2, 1} ), Add Term( {3, 1} ),

Add Potential Term( {3, 2} ), Add Potential Term( {3, 3} ),

Add Potential Term( {3, 4} ), Add Potential Term( {3, 5} ), Add Term( {4, 1} ),

Add Term( {5, 1} ), Add Term( {6, 1} ), Set Sample Size( 32 ),

Disallowed Combinations(

Sonotrodenkombination == 1 & Ziehspaltverhältnis == 0.73 |

Sonotrodenkombination == 1 & Ziehspaltverhältnis == 0.87 |

Sonotrodenkombination == 1 & Ziehspaltverhältnis == 1.13 |

Sonotrodenkombination == 1 & Ziehspaltverhältnis == 1.23 |

Sonotrodenkombination == 1 & Ziehspaltverhältnis == 1.31 |

Sonotrodenkombination == 3 & Ziehspaltverhältnis == 0.73 |

Sonotrodenkombination == 3 & Ziehspaltverhältnis == 0.87 |

Sonotrodenkombination == 3 & Ziehspaltverhältnis == 1.13 |

Sonotrodenkombination == 3 & Ziehspaltverhältnis == 1.23 |

Sonotrodenkombination == 3 & Ziehspaltverhältnis == 1.31 |

Sonotrodenkombination == 5 & Ziehspaltverhältnis == 0.73 |

Sonotrodenkombination == 5 & Ziehspaltverhältnis == 0.87 |

Sonotrodenkombination == 5 & Ziehspaltverhältnis == 1.13 |

Sonotrodenkombination == 5 & Ziehspaltverhältnis == 1.23 |

Sonotrodenkombination == 5 & Ziehspaltverhältnis == 1.31 |

Sonotrodenkombination == 7 & Ziehspaltverhältnis == 0.73 |

Sonotrodenkombination == 7 & Ziehspaltverhältnis == 0.87 |

Sonotrodenkombination == 7 & Ziehspaltverhältnis == 1.13 |

Sonotrodenkombination == 7 & Ziehspaltverhältnis == 1.21 |

Sonotrodenkombination == 7 & Ziehspaltverhältnis == 1.31 |

Sonotrodenkombination == 2 & Ziehspaltverhältnis == 0.57 |

Sonotrodenkombination == 2 & Ziehspaltverhältnis == 0.68 |

Sonotrodenkombination == 2 & Ziehspaltverhältnis == 0.88 |

Sonotrodenkombination == 2 & Ziehspaltverhältnis == 0.96 |

Sonotrodenkombination == 2 & Ziehspaltverhältnis == 1.02 |

Sonotrodenkombination == 4 & Ziehspaltverhältnis == 0.57 |

Sonotrodenkombination == 4 & Ziehspaltverhältnis == 0.68 |

Sonotrodenkombination == 4 & Ziehspaltverhältnis == 0.88 |

Sonotrodenkombination == 4 & Ziehspaltverhältnis == 0.96 |

Sonotrodenkombination == 4 & Ziehspaltverhältnis == 1.02 |

Sonotrodenkombination == 6 & Ziehspaltverhältnis == 0.57 |

Sonotrodenkombination == 6 & Ziehspaltverhältnis == 0.68 |

Sonotrodenkombination == 6 & Ziehspaltverhältnis == 0.88 |

Sonotrodenkombination == 6 & Ziehspaltverhältnis == 0.96 |

Sonotrodenkombination == 6 & Ziehspaltverhältnis == 1.02 |

Sonotrodenkombination == 8 & Ziehspaltverhältnis == 0.57 |

Sonotrodenkombination == 8 & Ziehspaltverhältnis == 0.68 |

Sonotrodenkombination == 8 & Ziehspaltverhältnis == 0.88 |

Sonotrodenkombination == 8 & Ziehspaltverhältnis == 0.96 |

Sonotrodenkombination == 8 & Ziehspaltverhältnis == 1.02

), Optimality Criterion( 1 ), Make Design}

)