JMP User Community

Latest Discussions

Formula - Weekly average for the fist three quarters in a year

Hi, Data is displayed on a daily basis (mon - sat). I have converted the date to days of week, weeks, months, quarters, years. Iam trying to get the average weekly value for the time period 1/1/2015 - 10/3/2015. This would be displayed on 10/5/2015 and it would contain the same value for the rest of the year. So in essence, it is one weekly average value for Q1 - Q3. I think I can do this in ...
mstanko

Discussions |
May 31, 2017 2:32 PM

7723 views | 6 replies
Parallel Processing in Scripting

In the process of putting togother a lengthy script that makes some calls to ODBC/SQL databases that can each take several minutes to run. In an ideal world I could be waiting for multiple servers to get back to me at the same time. From what I am gathering I have to stick with just running one database request after another?I am running JMP 9.
firemandan9

Discussions |
May 31, 2017 12:46 PM

7207 views | 4 replies
How to determine sample size for known defect size?

We are currently testing some chips and have a high open short failure. We are taking a sample size of 60% of the original lot and performing a sample test. Our unaccepatable defect rate for whole lot is 0.3%. I want to know with a lot size of 8000 or 10000 and a sample size of 60% of this lot size. What will be my defect rate should be to determine my whole lot has a defect rate of 0.3%. Example...
Aravindan

Discussions |
May 31, 2017 10:04 AM

17317 views | 2 replies
Disabling all or individual check boxes not able to be re-enabled with opposite method

I have two sets of check boxes and one is being used to control which options are enabled on the other. I seem to have run into an issue using Enable and Enable Item. If I have previously disabled all the checkboxes I am unable to enable them individually unless I enable them all first. Conversly, if I disable individual check boxes, it appears I am unable to enable them all at once. As it is curr...
SG

Discussions |
May 30, 2017 12:14 PM

3878 views | 1 replies
Reset Button

I have a script that creates a window to recieve user input via text edit boxes and checkboxes. I want there to be three buttons in the window, one of which is a reset button that clear all the checkboxes and reset the text edit boxe back to their defaults (either blank, "---", or "mm/dd/yyyy"). I've gotten the checkbox part to work, but can't figure out how to reset the text edit boxes. Is this p...
rfeick

Discussions |
May 30, 2017 8:38 AM

9885 views | 5 replies

Previous
Next

Latest Discussions

Parallel Processing in Scripting

In the process of putting togother a lengthy script that makes some calls to ODBC/SQL databases that can each take several minutes to run. In an ideal world I could be waiting for multiple servers to get back to me at the same time. From what I am gathering I have to stick with just running one database request after another?I am running JMP 9.
firemandan9

Discussions |
May 31, 2017 12:46 PM

7207 views | 4 replies
Disabling all or individual check boxes not able to be re-enabled with opposite method

I have two sets of check boxes and one is being used to control which options are enabled on the other. I seem to have run into an issue using Enable and Enable Item. If I have previously disabled all the checkboxes I am unable to enable them individually unless I enable them all first. Conversly, if I disable individual check boxes, it appears I am unable to enable them all at once. As it is curr...
SG

Discussions |
May 30, 2017 12:14 PM

3878 views | 1 replies
how to change the range of this graph ?

i am attaching a image of the graph, in this graph if you can see on the y-axis all the ranges are from 015 to 15. But if you can see only C15 label has higher value than 15 but the other labels are less than 5 for C14 and C16. So how can i change the values of C14 and C16 to lesser values like 8 in this case for C14 and 5 for C15. Plz share your opinion. Also the values are much coarser i.e +15 ...
Drharsha

Discussions |
May 28, 2017 3:58 PM

6640 views | 3 replies
apply my PLS model to new data

Hey all, I am using Partial Least Squares (PLS) analysis to find a model to predict concentration of sustance from spectral data - which means I have 6800 variables.After tweaking the data, resampling, tweaking some more and other things I seem to have found a predictive model that I can trust. My question isHow can I apply this model to new data? even one sample at a time. Thanks!Amir PS - Using ...
anakar

Discussions |
May 26, 2017 11:54 AM

7678 views | 2 replies
How do I test the parallel lines assumption when doing ordinal regression in JMP?

It can be done in SAS but I can't find that this is available in JMP and it is not clear to me how to edit the ordinal regression script in JMP to get the results I need.
dherring_wakehe

Discussions |
May 26, 2017 6:47 AM

14094 views | 5 replies

Previous
Next

Latest Discussions

Printing worksheet with cell colors

Hello JMP Community, I'm currently using JMP version 10.0.0 and having trouble printing my data table with cells highlighted in certain colors. Is there a way to print keeping the colors or to even export the file keeping the cells highlighted?

Thanks.
ferdt58

Discussions |
May 16, 2017 9:14 AM

2370 views | 0 replies
Linearity and Bias Report

In Our MSA stsudy we are performing Linearity and Bias measurment. We are currently controlling at Linearity and Bias to be below 5%. We actually generate the following report for Linearity and BIas. However in AIAG handbook the criteria for the gauge to pass bias criteria has the following criteria.
Aravindan

Discussions |
Apr 18, 2017 12:54 AM

4638 views | 0 replies
CCC Optimal

Hi,I have 2 clustering chooses as mentionned below,- Nr of cluster 15 : CCC = 69.99 (OPTIMAL)- Nr of cluster 15 : CCC = -92.87- Nr of cluster 15 : CCC = -112.8 The first one with CCC = 69.99 is mentionned as the best optimal. I don't understand why this one is the best by consedering the different values ?. What is the signification of these values ? Thanks,
Lamine

Discussions |
Mar 17, 2017 5:25 AM

3512 views | 0 replies
Understanding the Dispatch and Legend Model and what exactly is Base(0,0,0)?

My problem is two fold. Im writing a JSL Function to create some custom charts at work. Everything is working fine. Thats great. But I dont understand why - and I am trying to break down the code. Most of I wrote myself, but some aspects I made the tweaks within JMP, copied the scripts and used the parts that generated what I needed. Some of the code chunks that get added in are intuitive to read ...
kevinwtbolger

Discussions |
Feb 26, 2017 9:30 AM

3660 views | 0 replies
Data Binding Associative Arrays

I recently had need to create some slightly complex data structures and started to play with associative arrays a little more. These are similar to dictionaries in other languages. Where they differ is that most languages to improve speed, when assigning an object in a dictionary to a variable it does a data binding. Essentially it makes it so both the dictionary and the variable refer to the s...
msharp

Discussions |
Feb 14, 2017 1:53 PM

4629 views | 0 replies