JMP User Community

Latest Discussions

repeated-measures ANCOVA: How to perform the analysis when the parallel slope assumpt. doesn't meet?

Hi all,I need to perform the ANCOVA for a repeated-measures design. I tried to adapt the Julian's ANCOVA procedure showed on the https://www.youtube.com/watch?v=mApbp1RDy-U to my study case (repeated-measures design). Initially, I did the following actions: 1. In the Fit Y by X dialogue: I selected VAR_Y as "Y, Response" and VAR_X as "X, Factor";2. For "Group by" I selected the variable Timepoint;...
Reinaldo

Discussions |
Jun 18, 2018 6:31 AM

3511 views | 0 replies
Is the Runs Test (Wald-Wolfowitz Test) implemented in JMP 14 Pro?

I have a vague recollection that the Runs Test (Wald-Wolfowitz Test) for assessing the randomness of time-ordered data was on track to be added to JMP 14. I have searched high and low, though, and cannot find it anywhere in v14. Can someone please confirm whether this test is in v14 and, if so, where? We, of course, have a wonderful addin-in at https://community.jmp.com/t5/JMP-Add-Ins/Runs-Test-Wa...
MAS

Discussions |
Jun 18, 2018 5:59 AM

5042 views | 1 replies
How do I dynamically concatenate n data tables in JSL

I am creating a script to automate the workflow for a co-worker that is a novice JMP user. The the first operation of the script is to combine all of the iterations of data from model runs. This is accomplished by, The user is prompted to select the directory of the individual data tables that represent n iterations of a model run.The script opens all the iteration data tables that have a predefin...
mdawson69

Discussions |
Jun 17, 2018 12:02 PM

9105 views | 2 replies
8-run Plackett-Burman with JMP14

Hi everyone,How can I perfrom an 8-run Plackett-Burman design with JMP14? Browsing the online documentation about Plackett-Burman suggests to include 4 additional runs and construct a 12-run Plackett-Burman design instead. However, a 12-run is just too much as I only have 4 factors... so a PB-8 would be enough for me. Unfortunately, after choosing Classical > Screening Design and setting the respo...
FabioRoselet

Discussions |
Jun 15, 2018 1:06 PM

6567 views | 3 replies
Extract data from a oneway analysis

I am trying to create a script to take the p-value from the oneway analysis and drop that into a new column in the table used for the analysis. I looked over the JMP 13 scripting guide and on page 690, there is "Extract Values from an Analysis into a Report" which seems to be what I want. However following that as a guide, it does not appear to work with oneway and anovas... Here is the liste...
JohnTM

Discussions |
Jun 15, 2018 12:26 PM

10064 views | 5 replies

Previous
Next

Latest Discussions

repeated-measures ANCOVA: How to perform the analysis when the parallel slope assumpt. doesn't meet?

Hi all,I need to perform the ANCOVA for a repeated-measures design. I tried to adapt the Julian's ANCOVA procedure showed on the https://www.youtube.com/watch?v=mApbp1RDy-U to my study case (repeated-measures design). Initially, I did the following actions: 1. In the Fit Y by X dialogue: I selected VAR_Y as "Y, Response" and VAR_X as "X, Factor";2. For "Group by" I selected the variable Timepoint;...
Reinaldo

Discussions |
Jun 18, 2018 6:31 AM

3511 views | 0 replies
8-run Plackett-Burman with JMP14

Hi everyone,How can I perfrom an 8-run Plackett-Burman design with JMP14? Browsing the online documentation about Plackett-Burman suggests to include 4 additional runs and construct a 12-run Plackett-Burman design instead. However, a 12-run is just too much as I only have 4 factors... so a PB-8 would be enough for me. Unfortunately, after choosing Classical > Screening Design and setting the respo...
FabioRoselet

Discussions |
Jun 15, 2018 1:06 PM

6567 views | 3 replies
Nested if Statement

Hi, I just want to make sure that the following nested if statement will function correctly. At the moment I'm getting an error so I thought it might be to do with the way I constructed my nested if statement:If (ismissing(dt:newColumnName[k]), For Each Row(If(dt:colAutomatically <= colManually[k] & dt:colAutomatically >= colManuallyStart[k], dt:newColumnName = colInstructions[k], dt: newColumnNa...
Jaz

Discussions |
Jun 14, 2018 2:04 AM

4664 views | 2 replies
Variability Gage plot labeling of means

Hello! Whenever I plot a variability gage plot, I use text boxes in order to label the means displayed in the summary report below the plot. Is there an easier way to quickly create labels? My only thought on this would be to create a new column to calculate the means of each grouping so that I can then label rows by that new column. However, I have no idea how to "group-by" in the formula editor....
Dr_Ballesteros

Discussions |
Jun 13, 2018 2:05 PM

4107 views | 1 replies
The difference between glue and if

Could someone gives me some insprision about the differences between glue and if in jmp? I got so confused. Thanks a lot!
Anonymous

Discussions |
Jun 13, 2018 5:42 AM

6668 views | 4 replies

Previous
Next

Latest Discussions

repeated-measures ANCOVA: How to perform the analysis when the parallel slope assumpt. doesn't meet?

Hi all,I need to perform the ANCOVA for a repeated-measures design. I tried to adapt the Julian's ANCOVA procedure showed on the https://www.youtube.com/watch?v=mApbp1RDy-U to my study case (repeated-measures design). Initially, I did the following actions: 1. In the Fit Y by X dialogue: I selected VAR_Y as "Y, Response" and VAR_X as "X, Factor";2. For "Group by" I selected the variable Timepoint;...
Reinaldo

Discussions |
Jun 18, 2018 6:31 AM

3511 views | 0 replies
Time Series - Prewhiten

Hello Everyone, My question pertains to understanding what the terminology in JMP's prewhiten platform means.Also, understanding how that helps me determine an appropriate Transfer Function that I can use to test whether x causes y. JMP's prewhiten output shows three different ACF's labeled "Prewhiten Corr", "Noise AutoCorr", & "Noise Partial AutoCorr".
What is the Prewhiten Corr, Noise AutoCorr, &...
nopon649

Discussions |
Jun 7, 2018 11:10 PM

2508 views | 0 replies
Fit Spline By Group: Save Spline Coefficients to Column?

Hi all--having an issue. I am using Fit Y by X to fit 5,000 separate regressions. I hold control, select red drop-down arrow, and Fit->Flexible, Fit->Spline and select, say, 0.1. This fits a spline to all 5,000 graphs with lambda of 0.1. I have 28 X values in each of 5,000 graphs, and I understand there are 4 different spline coefficients (A, B, C, D). I understand if I just had 1 regression...
M0gAl0g

Discussions |
Jun 5, 2018 3:19 PM

3094 views | 0 replies
Why does Profiler not stop

All,
I have a script I am trying to profile and improve on. When I run the script without the profiler, it runs and ends within 4 minutes. When I try to profile the script, even after a good 5-6 minutes, it does not stop. Wondering why this is happening and if there is a way to use profiler and not run into this. I am using JMP 13.
uday_guntupalli

Discussions |
Apr 27, 2018 7:12 AM

1889 views | 0 replies
P value, L-R Chi Square, Prob Chi Square in Choice results

Hello everybodyI am going to undrestand the P value, L-R Chi Square, Prob Chi Square in Choice results. But different interpretations of these values can be found in the web. It seems that the true interpretation is related to null hypothesis and confidence intervel.The results of the study are as the attached pictures.Could any body inform me what exactly these statistics are saying and base on w...
aryasohrabi

Discussions |
Mar 17, 2018 2:22 AM

4058 views | 0 replies