JMP User Community

Latest Discussions

Script to enter new row data in popup window.

Hi, I am looking to have a script produce a popup window for a user to enter data that will be added to a new row. The user only needs to add data in certain columns. I am close with the script but can't figure out how to get it to work. Added the data table with my script attempt. Any help will be appreciated, thanks in advance! Regards,Chris
CTrahon0526

Discussions |
Feb 1, 2024 7:38 AM

5937 views | 5 replies
Instead of Odds Ratio I see Decimal place?

Wondering how to fix this in JMP? I have successfully run three chi-squared tests, and found the the odds ratio for each of them. Why is JMP not returning an odds ratio in this case? Thanks for any help you are able to provide!
Parrot943

Discussions |
Feb 1, 2024 7:15 AM

1364 views | 2 replies
Automate Powerpoint report filling via JSL

Hello, Here's my problem: I have several powerpoint capability reports to generate for customers, all these reports use the same template (my company's template).What changes depending on the customer are the materials on which I make my control charts in these reports, and I don't have the same number of control charts to plot depending on the customer.I have >60 reports to generate. I wanted to ...
SophieCuvillier

Discussions |
Feb 1, 2024 7:07 AM

1229 views | 2 replies
How to Include a 'No Shift' Scenario in a Temperature Shift DOE

I'm currently working on a Design of Experiments (DOE) for a process that involves temperature shifts at three different times. My challenge is incorporating a 'No Shift' scenario as one of the factors. My initial idea was to:Treat the three time points for temperature shifts (1 hour, 2 hours, 3 hours) as a continuous factor.Introduce a 'No Shift' scenario as a categorical factor (yes/no).However,...
Nicola_Nuti

Discussions |
Feb 1, 2024 12:07 AM

2724 views | 7 replies
Add reference line to Y-group axis

Hello, I am using graph builder (JMP 17) and have almost what I need. But I need to add a reference line. This first image ('example') is what I currently have (I need all 3 viruses in 1 graph with lines and dots for the rates for both years). BUT, I need to add a reference line for each virus so that it looks like 'example with ref line' (below). I don't know if it is possible. But essentially, ...
patriciafm811

Discussions |
Jan 31, 2024 11:31 AM

6944 views | 14 replies

Previous
Next

Latest Discussions

Automate Powerpoint report filling via JSL

Hello, Here's my problem: I have several powerpoint capability reports to generate for customers, all these reports use the same template (my company's template).What changes depending on the customer are the materials on which I make my control charts in these reports, and I don't have the same number of control charts to plot depending on the customer.I have >60 reports to generate. I wanted to ...
SophieCuvillier

Discussions |
Feb 1, 2024 7:07 AM

1229 views | 2 replies
How to Include a 'No Shift' Scenario in a Temperature Shift DOE

I'm currently working on a Design of Experiments (DOE) for a process that involves temperature shifts at three different times. My challenge is incorporating a 'No Shift' scenario as one of the factors. My initial idea was to:Treat the three time points for temperature shifts (1 hour, 2 hours, 3 hours) as a continuous factor.Introduce a 'No Shift' scenario as a categorical factor (yes/no).However,...
Nicola_Nuti

Discussions |
Feb 1, 2024 12:07 AM

2724 views | 7 replies
Add reference line to Y-group axis

Hello, I am using graph builder (JMP 17) and have almost what I need. But I need to add a reference line. This first image ('example') is what I currently have (I need all 3 viruses in 1 graph with lines and dots for the rates for both years). BUT, I need to add a reference line for each virus so that it looks like 'example with ref line' (below). I don't know if it is possible. But essentially, ...
patriciafm811

Discussions |
Jan 31, 2024 11:31 AM

6944 views | 14 replies
How to get frequencies for 5 points summary values?

I am struggling to understand how the frequency values are obtained in this example (5% and 95 % quantiles assumed).https://community.jmp.com/t5/JSL-Cookbook-Archived/Create-a-Box-Plot-from-a-Five-Number-Summary/ta-p/41278 How would the values change if I have 25% and 75% quantile values? (In my case, I will have Min, Q1 (25%), Median, Q3 (75%) and Max values)
Neo

Discussions |
Jan 31, 2024 11:07 AM

1930 views | 4 replies
Modeling Type

How do you know when to use an ordinal modeling type versus a nominal type. For example, If I am using numbers to label a product, in JMP I would use that as a nominal type correct?Then if I have a certain sequence in which these products are being shown then, whatever sequence (ex. 1, 2 or 3) would be ordinal modeling type correct? Or would they both simply be nominal type? Thanks for your help!
lrovelo

Discussions |
Jan 31, 2024 8:02 AM

4706 views | 3 replies

Previous
Next

Latest Discussions

How might I include a line break (or a second line) in the print header of a PDF generated from a Journal window?

w = New Window("window", <<Journal, hlb = hlistbox() ); w << Set Print Headers( "lineone \!n linetwo", "", "Page &pn; of &pc;" ); w << SavePDF ( "C:\Users\blahblah.pdf");The above script should include a line break in the "left header" so that it has two lines. Instead the resulting PDF just has a non-printing box character between the two words, like this ... and if i copy that text into this wi...
mann

Discussions |
Jan 31, 2024 6:25 AM

944 views | 0 replies
Optimal decision tree and Adam's consensus?

Hello - First of all, I'm speaking very much as a non-statistician here. I have a paper I'm trying to replicate that is doing hierarchical clustering with multiple similarity functions and grouping methodologies, and then using an Adam's consensus to find a sort of "optimal" dendrogram, if you will. I looked at their software they were using, and its been out of comission for a good 15 years. JMP ...
ehchandlerjr

Discussions |
Jan 26, 2024 11:06 AM

744 views | 0 replies
Use Limits Table In Distributions Platform

Hi, is it possible to use a limits table to load specifications grouped by some factor in platforms other than Process Screening? Ideally I'd like to use the limits table in the distributions platform. Thanks in advance, Alicia
Alicia

Discussions |
Jan 25, 2024 8:24 AM

698 views | 0 replies
Which predictive analysis method/column organisation for RSM output with duplicate samples

Hi all. So I'm working on a project where I have 2 x component classes, each of which has 4 items within the class, which are mixed together at varying concentrations over 48 combinations. Figured the best Factor way to do this was to use 2 x Continuous for the max/min concentrations for each class, then 2 x 4-level Categoricals for each of the items. Each of the combinations was made twice, so af...
ProbitLeopard63

Discussions |
Jan 25, 2024 3:06 AM

729 views | 0 replies
how to show "nonparametric overlay" in the output of "Fit life by x"?

I tried to do “Fit life by X” (fit TTF by voltage), but in the output, somehow “nonparametric overlay” did not show up. I was hoping to see the probability of failure vs time at 80V, 50V, and 15V (use condition), but that plot was not included in the output. I attached the report here. If anyone can take a look and point out went wrong, that would be great. Thank you!
RenZ

Discussions |
Jan 22, 2024 10:02 AM

583 views | 0 replies