Uniform axis scaling in Control Chart Builder Script

[#1]

I am working on a script to cycle through a list of properties and make a pair of control charts for each.  The pair (by "Line") of charts must be displayed side-by-side and have the same Y-axis scaling.

I have a list of properties (a list variable called CCProperty), and a list of axis settings for each property (a matrix variable called CCFormat).  Even though I used the same numbers (as CCFormat[i,j]) for min, max, increment, and number of ticks for each graph, the scales do not consistently match.

Any help would be appreciated. I am using JMP Pro 18.1.1

The full data table with embedded script is attached.  Here's a snippet of the code:

For(i=1, i <= N Items(CCProperty), i += 1,  //  Loop through all the properties and make control charts using the graph min and max

Mainbox<<append(hb=H List Box()); //Append the horizontal box with the two graphs to the mainbox


//*********Generate the Control Chart for LINE 1:**************
	hb<<append(Control Chart Builder(
	Size( 650, 600 ),Graph Spacing( 10 ),
	Test Excluded Subgroups( 0 ),Show Limit Labels( 1 ),Show Capability( 0 ),Show Limit Summaries( 0 ),
	
	Variables( Subgroup( :Workorder ), Y(column(CCProperty[i])) ),
	Chart(Position( 1 ),Points( Statistic( "Average" ) ),Limits( Sigma( "Moving Range" ), Spec Limits( 1 ) )	),
	Chart(Position( 2 ),Points( Statistic( "Moving Range on Means" ) ),Limits( Sigma( "Moving Range" ) )	),
	Chart(Position( 3 ),Points( Statistic( "Standard Deviation" ) ),Limits( Sigma( "Standard Deviation" ) )	),
	Show Control Panel( 0 ),
	By( :Line ),

	Where( :Line == "Line 1" ),
	SendToReport(Dispatch(CCProperty, ScaleBox,{Min( CCFormat[i,1] ),Max( CCFormat[i,2] ),Inc( CCFormat[i,3] ),Minor Ticks( CCFormat[i,4] )}	),
			),
	));

	
//*********Generate the Control Chart for LINE 2:**************
	hb<<append(Control Chart Builder(
	Size( 650, 600 ),Graph Spacing( 10 ),
	Test Excluded Subgroups( 0 ),Show Limit Labels( 1 ),Show Capability( 0 ),Show Limit Summaries( 0 ),
	
	Variables( Subgroup( :Workorder ), Y(column(CCProperty[i])) ),
	Chart(Position( 1 ),Points( Statistic( "Average" ) ),Limits( Sigma( "Moving Range" ), Spec Limits( 1 ) )	),
	Chart(Position( 2 ),Points( Statistic( "Moving Range on Means" ) ),Limits( Sigma( "Moving Range" ) )	),
	Chart(Position( 3 ),Points( Statistic( "Standard Deviation" ) ),Limits( Sigma( "Standard Deviation" ) )	),
	Show Control Panel( 0 ),
	By( :Line ),
	Where( :Line == "Line 2" ),
	SendToReport(Dispatch(CCProperty, ScaleBox,{Min( CCFormat[i,1] ),Max( CCFormat[i,2] ),Inc( CCFormat[i,3] ),Minor Ticks( CCFormat[i,4] )}),
			),
		
	));
	
);  //end of For Loop

[#2]

I did slight changes to your script which might solve the issue in this case. This part I changed the most

SendToReport(
	Dispatch({}, CCProperty[i], ScaleBox, {Min(CCFormat[i, 1]), Max(CCFormat[i, 2]), Inc(CCFormat[i, 3]), Minor Ticks(CCFormat[i, 4])}),
)

View more...

Names Default To Here(1);

CCProperty = {"Strength", "Elongation", "Weight", "Thickness"};

CCFormat = [60 66 1 4, 25 45.5 5 4, 3.4 4.0 0.1 4, 8 16 1 4];

outputwin = New Window("Control Charts", Outline Box("Control Charts", Mainbox = V List Box()));

For(i = 1, i <= N Items(CCProperty), i++,
	Mainbox << append(hb = H List Box());

	hb << append(
		Control Chart Builder(
			Size(650, 600),
			Graph Spacing(10),
			Test Excluded Subgroups(0),
			Show Limit Labels(1),
			Show Capability(0),
			Show Limit Summaries(0), 
	
			Variables(Subgroup(:Workorder), Y(Column(CCProperty[i]))),
			Chart(Position(1), Points(Statistic("Average")), Limits(Sigma("Moving Range"), Spec Limits(1))),
			Chart(Position(2), Points(Statistic("Moving Range on Means")), Limits(Sigma("Moving Range"))),
			Chart(Position(3), Points(Statistic("Standard Deviation")), Limits(Sigma("Standard Deviation"))),
			Show Control Panel(0),
			By(:Line), 

			Where(:Line == "Line 1"),
			SendToReport(
				Dispatch({}, CCProperty[i], ScaleBox, {Min(CCFormat[i, 1]), Max(CCFormat[i, 2]), Inc(CCFormat[i, 3]), Minor Ticks(CCFormat[i, 4])}),
			)
		)
	);

	hb << append(
		Control Chart Builder(
			Size(650, 600),
			Graph Spacing(10),
			Test Excluded Subgroups(0),
			Show Limit Labels(1),
			Show Capability(0),
			Show Limit Summaries(0), 
	
			Variables(Subgroup(:Workorder), Y(Column(CCProperty[i]))),
			Chart(Position(1), Points(Statistic("Average")), Limits(Sigma("Moving Range"), Spec Limits(1))),
			Chart(Position(2), Points(Statistic("Moving Range on Means")), Limits(Sigma("Moving Range"))),
			Chart(Position(3), Points(Statistic("Standard Deviation")), Limits(Sigma("Standard Deviation"))),
			Show Control Panel(0),
			By(:Line),
			Where(:Line == "Line 2"),
			SendToReport(
				Dispatch({}, CCProperty[i], ScaleBox, {Min(CCFormat[i, 1]), Max(CCFormat[i, 2]), Inc(CCFormat[i, 3]), Minor Ticks(CCFormat[i, 4])}),
			)
		)
	);
);  //end of For Loop

Generally I would suggest setting the axis values outside of the graph, but in simple case like this, using sendtoreport inside the graph message should be enough

[#3]

Thanks for the help!  I guess the missing subscript [i] in my CCProperty list variable was the cause of my issues.