cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
  • Image to Table JMP extension imports single or batch images as data tables. Useful to extract curves from pictures or convert image data to curve data to use in analyses like Functional Data Explorer. Download and install the extension.

Discussions

Solve problems, and share tips and tricks with other JMP users.
Choose Language Hide Translation Bar
Celine1
Level II

How to set control limit in IMR chart and Xbar R chart

Greetings,
I'm using JMP 17, I tried to set control limit for IMR chart and X bar R chart. 
Although I have set the control limits, when I run the script, the control limits do not change as I have set them.
dt is the data table.
below is the script for IMR chart:

dt = Open( "$SAMPLE_DATA/Time Series/Workers.jmp" );

Gra = dt << Control Chart Builder(
	K Sigma( 2.5 ),
	Variables( Subgroup( :DATE ), Y( :"electrical workers, thousands" ) ),
	Chart(
		Position( 1 ),
		Warnings( Test 1( 1 ), Test 3( 1 ) ),
		Set Control Limits( {LCL( 287.5 ), UCL( 312 ), Avg( 300 )} )
	),
	Chart(
		Position( 2 ),
		Warnings( Test Beyond Limits( 1 ) ),
		Set Control Limits( {LCL( 0 ), UCL( 15 )} )
	),
	SendToReport(
		Dispatch( {}, "Warnings[1]", OutlineBox, {Close( 0 )} ),
		Dispatch( {"Warnings[1]"}, "Tests", OutlineBox, {Close( 0 )} ),
		Dispatch( {}, "Warnings[2]", OutlineBox, {Close( 0 )} )
	)
)

below is the script for XbarR chart:

dt = Open( "$SAMPLE_DATA/Quality Control/Line Length.jmp" );

Control Chart Builder(
	K Sigma( 2.5 ),
	Variables( Subgroup( :Run ), Y( :Length ) ),
	Chart(
		Position( 1 ),
		Limits( Sigma( "Levey Jennings" ) ),
		Warnings( Test 1( 1 ), Test 3( 1 ) ),
		Set Control Limits( {LCL( 15.8 ), UCL( 16.2 ), Avg( 16 )} )
	),
	Chart(
		Position( 2 ),
		Limits( Sigma( "Levey Jennings" ) ),
		Warnings( Test Beyond Limits( 1 ) ),
		Set Control Limits( {LCL( 0 ), UCL( 0.16 )} )
	),
	SendToReport(
		Dispatch( {}, "Warnings[1]", OutlineBox, {Close( 0 )} ),
		Dispatch( {"Warnings[1]"}, "Tests", OutlineBox, {Close( 0 )} ),
		Dispatch( {}, "Warnings[2]", OutlineBox, {Close( 0 )} )
	)
)


How to set the control limit?
Thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions

Re: How to set control limit in IMR chart and Xbar R chart

I believe the K Sigma(2.5) argument is overriding the Set Control Limits argument. If you remove it, the limits are set as specified.

View solution in original post

1 REPLY 1

Re: How to set control limit in IMR chart and Xbar R chart

I believe the K Sigma(2.5) argument is overriding the Set Control Limits argument. If you remove it, the limits are set as specified.

Recommended Articles