Generate Fit line to Y in log scale -X plot using JSL

[#1]

Hi,

I want to use JSL to plot y1 (in log scale) vs. x1 for only Case == a AND Parameter value ==1 and then fit a line to this y1 (in log) vs. x1 (in linear scale). 

Case	x1	y1	Parameter
a	1.056706	1.058345	1
a	1.914662	2.495931	1
a	1.881596	2.414752	2
b	1.792529	2.208976	1
b	1.452459	1.572173	2
b	1.469782	1.599646	2
d	1.172629	1.188425	1
d	1.613962	1.847737	2
d	1.540313	1.716545	3
b	1.307825	1.360463	1
d	1.934486	2.545905	2
a	0.65008	1.915694	1
b	0.341004	1.406359	1
c	0.317435	1.3736	3
d	0.014095	1.014195	2
a	0.122089	1.129854	3
a	0.727195	2.069267	1
b	0.164983	1.179373	8
c	0.643878	1.903849	1
a	0.501787	1.65167	1

I am trying this but it gives me error:

Bivariate(
Y( :Name( "Y1" ) ),
X( :X1 ),
Fit Special( yTran( "Log" ), {Line Color( {213, 72, 87} )} ),
Fit Where(
:Case == "A"
:Parameter == "1",
Fit Special( yTran( "Log" ), {Line Color( "Dark Green" )} ),
),
SendToReport(
Dispatch(
{},
"1",
ScaleBox,
{Min( 60.936357421875 ), Max( 81.283232421875 ), Inc( 2 ),
Minor Ticks( 1 ), Label Row(
{Show Major Grid( 1 ), Show Minor Grid( 1 )}
)}
),
Dispatch(
{},
"2",
ScaleBox,
{Scale( "Log" ), Format( "Scientific", 11 ), Min( 0.0000002 ),
Max( 0.000634968347287381 ), Inc( 1 ), Minor Ticks( 1 ),
Label Row(
{Show Major Grid( 1 ), Show Minor Grid( 1 ), Set Font Size( 12 )}
)}
)
)
);

Regards,

AD

[#2]

You do not specify what type of error you experience and your code is difficult to debug.

Here is an example that may easier to use as a starting point. The complex dispatch syntax that is generated by JMP is rarely used when writing code "by hand".

bv = Bivariate(
    Y(:y1),
    X(:x1),
    Fit Special(yTran("Log")),
    Where(:Case == "a" & :Parameter == "1"),

);
// Customize axes by sending messages to the Axis Box()
Report(bv)[Axisbox(1)] << {Scale("Log"), inc(1), Minor Ticks(2), Show Major Grid(1),
Show Minor Grid(1)};