cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
JMP is taking Discovery online, April 16 and 18. Register today and join us for interactive sessions featuring popular presentation topics, networking, and discussions with the experts.
Choose Language Hide Translation Bar
kschnarrs
Level II

Column switcher with Control chart builder

When I hide the control panel on control chart builder, then use column switcher to toggle between control charts, the charts get smaller and smaller until you can no longer see them.

Does anyone know how to fix this?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Column switcher with Control chart builder

Greetings - my news is old, but i did find a reference to this issue in our logs, and it was addressed in JMP 13.1 and later. Anyone encountering this issue using an earlier version of JMP would be well-served to upgrade if possible.

View solution in original post

3 REPLIES 3
ian_jmp
Staff

Re: Column switcher with Control chart builder

With JMP 12.1 (on the Mac), the script below works for me with column switcher. Maybe contact JMP Technical Support giving your version number etc.?

NamesDefaultToHere(1);

dt = Open("$SAMPLE_DATA/Semiconductor Capability.jmp");

dt << Control Chart Builder(

Show Control Panel( 0 ),

Variables( Subgroup( :lot_id ), Y( :NPN1 ) ),

Chart( Position( 1 ) ),

Chart( Position( 2 ) ),

Column Switcher(

:NPN1,

{:NPN1, :PNP1, :PNP2, :NPN2, :PNP3, :IVP1, :PNP4, :NPN3, :IVP2, :NPN4, :SIT1,

:INM1, :INM2, :VPM1, :VPM2, :VPM3, :PMS1, :SNM1, :SPM1, :NPN5, :EP2, :ZD6,

:PBA, :PLG, :CAP, :PBA 2, :PLG 2, :PNP5, :NPN6, :PNP6, :PNP7, :NPN7, :PNP8,

:IVP3, :IVP4, :IVP5, :IVP6, :PNP9, :NPN8, :NPN9, :IVP7, :NPN10, :N_1, :PBA1,

:WPR1, :B10, :PLY10, :VBE210, :VTN210, :VTP210, :SIT2, :SIT3, :INV2, :INV3,

:INV4, :INV5, :FST1, :FST2, :RES1, :RES2, :PNM1, :PPM1, :FNM1, :FPM1, :FST3,

:FST4, :RES3, :RES4, :A1, :B1, :A2N, :A2P, :A2P1, :IVP8, :IVP9, :DE_H1,

:NF_H1, :ESM1, :ESM2, :ESP1, :YFU1, :VPM4, :PBA2, :PBB1, :LYA1, :LYB1, :DEM1,

:DEP1, :NFM1, :PLY1, :VDP1, :VDP2, :SNW1, :RSP2, :PLY2, :RSP1, :VDP3, :PBL1,

:PLG1, :VDP4, :SPW1, :VIA1, :INM3, :VPM5, :VPM6, :INM4, :VPM7, :M1_M1,

:M2_M2, :P1_P1, :E2A1, :E2B1, :NPN11, :IVP10, :PNP10, :INM5, :VPM8, :VPM9,

:INM6, :VPM10, :N2A1, :N2B1, :NM_L1, :P2A1, :P2B1, :PM_L1, :P1, :M1}

)

);

Nate_Riordan
Staff (Retired)

Re: Column switcher with Control chart builder

Hi kschnarrs,

I've seen this before as well.  The workaround is within what Ian is suggesting.  I've submitted this bug to tech support .  In the meantime I hope you're not afraid to modify the scripting code from the red triangle. The actual fix here is the removal of the size argument that is auto-generated when using the menu's to launch the control chart builder and add the column switcher.

10894_Screen Shot 2016-02-03 at 3.57.20 PM.png

Control Chart Builder(

    Size( 534, 454 ),

    Show Control Panel( 0 ),

    Variables( Y( :NPN1 ) ),

    Chart( Position( 1 ), Limits ),

    Chart( Position( 2 ) ),

    Column Switcher(

          :NPN1,

          {:NPN1, :PNP1, :PNP2, :NPN2, :PNP3, :IVP1, :PNP4, :NPN3, :IVP2, :NPN4, :SIT1,

          :INM1, :INM2, :VPM1, :VPM2, :VPM3, :PMS1}

    ),

    SendToReport(

          Dispatch(

              {},

              "NPN1",

              ScaleBox,

              {Add Ref Line( 104.412948990151, "Solid", "Blue", "LSL", 1 ),

              Add Ref Line( 131.893493064355, "Solid", "Blue", "USL", 1 ),

              Add Ref Line( 118.153221027253, "Solid", "Blue", "Target", 1 )}

          )

    )

);

Re: Column switcher with Control chart builder

Greetings - my news is old, but i did find a reference to this issue in our logs, and it was addressed in JMP 13.1 and later. Anyone encountering this issue using an earlier version of JMP would be well-served to upgrade if possible.