Apply Column Spec Limits based on Row Conditions

[#1]

I am seeking some help with whether or not JMP is capable of applying Column Spec Limits based on row conditions and if so how would one go about do that?

Attached is a sample table: The key parameters are :part_number, :set_id, :band1, X__57_AVG, X__58_AVG and X__59_AVG.

:part_number, :band1 and :set_id are the row (test) conditions while the other 3 are the results from the test.

I also attached the sample spec table..

Thanks in advance

[#2]

If you select any of the rows in the Process Screening report, you can then right click and there are several options that allow you to drill down to the details of the specific parameter.