Problems with JMP finding R

[#1]

I confirmed my "R_HOME" environment variable is set to my most recent R version.
##################################
//:*/
Get Environment Variable("R_HOME")
/*:

"C:\Program Files\R\R-2.12.2\"
##################################

I've also confirmed the InstallPath from HKEY_LOCAL_MACHINE\SOFTWARE\R-core\R also points to C:\Program Files\R\R-2.12.2\ just as a backup.

But I still get this error when I try to initialize the connection to R.
##################################
//:*/
R Init( );
/*:

An installed version of R could not be found.
-1
##################################

Appreciate any guidance.
-Landon

[#2]

My R_HOME variable does not have the trailing "\".

You might try that simple fix. More complicated is that the latest R release "R 2-12.2" just came out in Feb. 2011 - well after JMP v9.01. If something changed on the R side, directory structure, etc. it becomes a more complicated fix. One solution is to fall back to a tested (with JMP) version of R, but perhaps someone has a simple fix.

I am a big fan of the JMP R connection functionality - great stuff.

Best,
-Matt

[#3]

Tried removing the trailing \ but get the same error.
The Scripting Guide mentions
JMP 9 has been verified to operate correctly with R 2.9.1 and later.

##############################################
//:*/
R Init( );
/*:

An installed version of R could not be found.
-1

Get Environment Variable("R_HOME")
//:*/
Get Environment Variable("R_HOME")
/*:

"C:\Program Files\R\R-2.12.2"
##############################################

[#4]

I try to connect R 2.12 and later verion but I can't connect R.

I change R 2.11.1. It is good

Best Regards,

[#5]

Thanks clark,
I changed to 2.11.1 and it is now working for me as well.
I wondered what aspect of 2.12 broke the integration... and wonder if 2.13.0 will have similar problems.

Thanks, Landon

[#6]

MattF already mentioned... but I just realized in 2.12.0 and beyond that Rgui.exe and R.dll are found in a \bin\i386 or \bin\x64
C:\Program Files\R\R-2.12.2\bin\i386
and not in
C:\Program Files\R\R-2.11.1\bin

See the windows release notes at:
http://cran.r-project.org/bin/windows/base/old/2.12.0/CHANGES.R-2.12.0.html

As a small hack I just copied all the files in C:\Program Files\R\R-2.12.2\bin\i386
to C:\Program Files\R\R-2.12.2\bin\ and JMP is now able to connect to 2.12.2.

-Landon

[#7]

p.s.

When you get it up & running be sure and see a few nice SGF 2001 papers on JMP & R integration.

http://www.lexjansen.com/cgi-bin/xsl_transform.php?x=sgf2011&s=sugi&c=sugi

[#8]

Hi,

I am also having trouble with JMP finding R.  I tried the following:

• I ran RSetReg.exe in the \bin\x64\ folder.  No luck.
• I then copied all files in R\R-2.15.2\bin\x64\ folder to R\R-2.15.2\bin\, and re-run RSetReg.exe.  No luck.

I am using:

• JMP10
• R-2.15.2
• Both JMP and R are 64 bit versions.

Any ideas?

Thanks,

Rob

[#9]

The problem may be related to this JMP knowledge base post: 47268 - JMP® might not work with R 2.15 version

[#10]

Hi MS,

Thanks for the suggestion, but still no luck.

R-2.15.2 is my only installation of R.  But, I uninstalled and re-installed R anyway, just to check.  I also re-ran RSetReg.exe.  No luck.  Do you have other ideas?  My JMP log is below.

//:*/

Get Environment Variable( "R_HOME" );

/*:

""

//:*/

R Init();

R Submit( "

x <- 1:5

x

" );

R Term();

/*:

An installation of R cannot be found on this system. JMP R support requires R version 2.9.1 or higher in access or evaluation of 'Glue' , R Init();

R Submit( "

x <- 1:5

x

" );

R Term();

In the following script, error marked by /*###*/

R Init(); /*###*/R Submit( "

x <- 1:5

x

" ); /*###*/R Term() /*###*/;