cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
JMP is taking Discovery online, April 16 and 18. Register today and join us for interactive sessions featuring popular presentation topics, networking, and discussions with the experts.
Choose Language Hide Translation Bar
agonzales2021
Level III

Help with Graph builder labels

I have a graph builder output that looks like the one below and as you can see, it is WAAAYYY too congested.

The code I used to generate such a plot is in attachment where I had to use 3 graph elements per graph side (week vs month):
line, points (mean), and bar (for the values but the bars are set to be entirely transparents and white).

If there is another way to force labels, I was not able to figure that out. 

That said, I can't get label format or offset to work either. I tried both at the end of my graph buidler to send it messages and I tried including the label stuff in my bar section of the elements. Can someone please help me?

 

Capture.JPG

1 ACCEPTED SOLUTION

Accepted Solutions
jb
jb
Level IV

Re: Help with Graph builder labels

Instead of adding graph labels, you could edit the axis settings:

http://www.jmp.com/support/help/13-2/Customize_Axes_and_Axis_Labels_in_the_Axis_Setti.shtml#758337

 

Steps:

  • Double-click the Y Axis
  • Change the Maximum to 1.0
  • Change the Increment to 0.1
  • Click OK

 

This will make the values clearer without data labels.

 

 

View solution in original post

1 REPLY 1
jb
jb
Level IV

Re: Help with Graph builder labels

Instead of adding graph labels, you could edit the axis settings:

http://www.jmp.com/support/help/13-2/Customize_Axes_and_Axis_Labels_in_the_Axis_Setti.shtml#758337

 

Steps:

  • Double-click the Y Axis
  • Change the Maximum to 1.0
  • Change the Increment to 0.1
  • Click OK

 

This will make the values clearer without data labels.