topic Re: Row selection based on multiple columns and multiple criteria in Discussions

Row selection based on multiple columns and multiple criteria

tatiana_khasano — Wed, 26 Nov 2014 18:37:22 GMT

Hey guys,

I read the available threads on row selection but still can't compile a formula to accomplish what I need (sorry - I am VERY inexperienced still..).

I have a table that looks like this:

Person	Compound	Dose	Units
Smith	Aspirin	200	mg
Smith	Aspirin	150	mg
Jones	Gabapentin	20	ug
Jones	Gabapentin	30	ug
Jones	NyQuil	60	mL
Edison	Motrin	600	mg
Edison	Motrin	600	mg

For each person, I need to look at column Compound and for each Compound, then look at doses and choose the row with higher dose. If one person had used two compounds I need to do dose evaluation for only a comp with multiple doses. So working my way through this table, I should get a new table as below:

Person	Compound	Dose	Units
Smith	Aspirin	200	mg
Jones	Gabapentin	30	ug
Jones	NyQuil	60	mL
Edison	Motrin	600	mg

Can someone please help? Will be very much appreciated!!!!!

Re: Row selection based on multiple columns and multiple criteria

pmroz — Wed, 26 Nov 2014 20:03:33 GMT

You can do this with a tabulation:

Person	Compound	Max
Edison	Motrin	600
Jones	Gabapentin	30
	NyQuil	60
Smith	Aspirin	200

Click on Analyze > Tabulate (JMP 11) or Tables > Tabulate (JMP 10, 9, 8)

Drag Person to the drop zone for rows.

Drag Compound just to the right of Person

Drag Dose on top of N

Drag Max on top of Sum

Click Done

Click the little red triangle and select Make into data table

You might have to normalize the units if that's a consideration.

Re: Row selection based on multiple columns and multiple criteria

Jeff_Perkinson — Tue, 18 Oct 2016 22:08:06 GMT

PMroz has a good solution.

Here's another.

Sort your table by Name, Compound, (ascending) Dose.

Then create a Row State column (Cols -> New Column).

And add a Formula.

The formula should be:


Selected State( :Compound != :Compound[Row() + 1] )

In the formula editor it looks like this:

This will select any row where the compound name is different from the compound name in the next row. Since the table is sorted by person, compound, and dose these rows will represent the maximum dose for each person.

You can then copy these selections to the active row state area using the pop-up menu next to the row state column name.

The rows will be selected and you can use Tables->Subset to get a new data table with just the selected rows.

I've attached a data table that shows this.

-Jeff

Re: Row selection based on multiple columns and multiple criteria

Byron_JMP — Wed, 26 Nov 2014 20:59:27 GMT

It looks like the logic for selecting the flagged rows might need to be a little more specific?

If( :Person == Lag( :Person, 1 ) & :Compound == Lag( :Compound, 1 ), 0, 1)

Try running this script against the dose table in Jeff's post, then run the sort script first, followed by the subset script.

dt=current data table();

dt<<New Script( "Sort First", dt = Current Data Table(); dt << Sort( replace table,

By( :Person, :Compound, :Dose ), Order( Ascending, Ascending, Ascending )););

dt<<New Script( "subset flagged rows", dt = Current Data Table(); dt << Select Where( :Flag == 1 );

dt << Subset( Output Table( "Subset of dose bw" ), Selected Rows( 0 ), Rows( [1, 3, 5, 6] ), Selected columns only( 0 )););

dt<<New Column( "Flag",

Numeric, Nominal, Format( "Best", 12 ),

Formula( If( :Person == Lag( :Person, 1 ) & :Compound == Lag( :Compound, 1 ),

0, 1 ) ));

Re: Row selection based on multiple columns and multiple criteria

mpb — Wed, 26 Nov 2014 21:35:43 GMT

I'm old fashioned and my first impulse is to use the older Tables > Summary approach which is very similar to using Tabulate.

1. Tables > Summary

2. Drag Person, then Compound into the Group box

3. Click Dose and then click the Statistics button and select Max

4. Click OK

or as a script:

dt = current data table();

dt << Summary( Group( :Person, :Compound ), Max( :Dose ) )

Michael

Re: Row selection based on multiple columns and multiple criteria

Jeff_Perkinson — Tue, 18 Oct 2016 22:08:16 GMT

Byron is right. I was a little too quick and forgot that if two people in sequence are taking the same compound then my condition won't catch the first one.

Here's a corrected formula and data table.


Selected State( :Compound != :Compound[Row() + 1] | :Person != :Person[Row() + 1] )

This time it selects the row if the compound or the person doesn't match the next row.

Re: Row selection based on multiple columns and multiple criteria

tatiana_khasano — Mon, 01 Dec 2014 00:11:31 GMT

Thank you, guys!

I tried all three solutions - and got the table I wanted.

It is way simpler than I thought - and I love summary and tabulate functions!!

Thanks again

Tania