topic Re: Multiple spec limits on chart in Discussions

Multiple spec limits on chart

Iheartjmp — Tue, 24 Sep 2019 16:57:38 GMT

How can I add multiple spec limits to control chart builder? I have incleded an example of what I would like my chart to look like. I am not intrested in UCL and lower control limt but rather the spec limits.

Re: Multiple spec limits on chart

Mark_Bailey — Tue, 24 Sep 2019 18:11:07 GMT

If you are not using a control chart, then you might make a run chart with Graph Builder and add reference lines for the specifications.

Re: Multiple spec limits on chart

Iheartjmp — Tue, 24 Sep 2019 19:34:27 GMT

Is there another way to do it do, so that I do not have to add every reference line for every spec limit? Just wondering because I have many charts and each one will need 4 reference lines.

Re: Multiple spec limits on chart

txnelson — Tue, 24 Sep 2019 19:53:06 GMT

You can actually use column properties, "Spec Limits" and specify "Show Limits" to display one set of limits on your Control Chart, and set your other set of limits to the column property "Response Limits" and also set those limits to be shown on the graph as reference lines. That may get you what you want

Re: Multiple spec limits on chart

Iheartjmp — Wed, 25 Sep 2019 02:12:23 GMT

Thank you for the response,

I found that the easiest way was to use the graph bulder add the reference lines and then copy the script but changing the varibels.