topic Re: Date Filter on Control Chart in Discussions

Date Filter on Control Chart

twillkickers — Wed, 01 Aug 2018 20:28:29 GMT

I am preparing a control chart, but I dont want to show data on 11/02/84 on the chart below. Normally, with graph builder, I will just use a local data filter to filter out the dates I do not want.

However, with control chart builder, there is a space left where the data has been filtered (see below.) Is there a way to make control chart builder behave like graph builder when using a local data filter? Graph builder will re-fit the X-axis to match the specified data range.

Re: Date Filter on Control Chart

Byron_JMP — Wed, 01 Aug 2018 20:38:08 GMT

Try rurning off the "Show Excluded Region" option

OSx, JMP 14

Re: Date Filter on Control Chart

twillkickers — Wed, 01 Aug 2018 21:03:38 GMT

Thanks for the tip! However, for some reason an unnecessary grey vertical line goes onto the graph once I turn off the "Show Excluded Region" option. Do you know what might be happening?

Re: Date Filter on Control Chart

tonya_mauldin — Thu, 02 Aug 2018 11:43:10 GMT

The problem of incorrect phase divider lines with show excluded region turned off was fixed in JMP 14.1. You need to upgrade.

Re: Date Filter on Control Chart

twillkickers — Thu, 02 Aug 2018 13:52:56 GMT

Thanks for the tip! Upgrading to JMP 14.1 fixed the problem right away.