topic Re: Conditional Pass/Fail based on limit in Discussions

Conditional Pass/Fail based on limit

adam — Thu, 05 Apr 2018 02:57:04 GMT

Hi guys,

Similar to one of previous posts, I have the following problem as shown as below:

In this case, if any of the result is >=15 in at least two sub_rad then it is consider Fail otherwise will be regarded as a Pass(as shown in the Pass_Fail col). Currently I'm using Formula but only know how to do it in a single sub_rad. Kindly suggest how can I do it with a script or formula.

Thank you.

ID	test_id	test_type	main_rad	sub_rad	result	Pass_Fail
M101XS	566	31	2	0	15	Fail
M101XS	566	31	2	1	16	Fail
M101XS	566	31	2	2	11	Pass
M101XS	566	31	3	0	12	Pass
M101XS	566	31	3	1	13	Pass
M101XS	566	31	3	2	14	Pass
M101XW	568	33	2	0	12	Pass
M101XW	568	33	2	1	16	Pass
M101XW	568	33	2	2	12	Pass
M101XW	568	33	2	0	12	Pass
M101XW	568	33	3	1	18	Fail
M101XW	568	33	3	2	20	Fail

Re: Conditional Pass/Fail based on limit

cwillden — Thu, 05 Apr 2018 03:28:51 GMT

It's not clear what group of runs is being sentenced as pass or fail. I would think it would be all the sub_rads within the same main_rad & test ID, but that's not what the Pass_Fail column shows, otherwise row 3 would also be a fail. Can you please clarify?

Re: Conditional Pass/Fail based on limit

txnelson — Thu, 05 Apr 2018 03:36:27 GMT

This is a guess on what you want......not sure all of the conditions are properly being checked on

This is a formula.....not open JSL code

dt = Current Data Table();
holdID = :ID;
holdtest_id = :test_id;
holdmain_rad = :main_rad;
numGE15 = N Rows(
	dt << get rows where(
		holdID == :ID & holdtest_id == :test_id & holdmain_rad ==
		:main_rad & :result >= 15
	)
);
If( :result >= 15 & numGE15 >= 2,
	"Fail",
	"Pass"
);

Re: Conditional Pass/Fail based on limit

adam — Thu, 05 Apr 2018 05:54:20 GMT

Sorry Cam, I didn't explain properly in the post. In this case, I am actually looking for at least 2 sub_rad that failed as my criteria hence that particular ID is consider failed. If the row 3 is out of spec then it is a failed as well otherwise I still regard it as a Pass. If I look at the overall (based on ID and result from sub_rad), then that particular ID is failed.

Hope it did not sound confusing to you :)

Thank you.