topic Re: Automating Gauge R&R On JMP for Large Number of Variables in Discussions

Automating Gauge R&R On JMP for Large Number of Variables

RA899 — Thu, 05 Feb 2026 18:01:29 GMT

Hello,

I'm currently running Gauge R&R report through JMP, and the steps I do is to use Variability/Attribute Gauge to generate the Gauge R&R table with measurement sources and variation. I'm using the steps below:

The issue is that after I run the variability chart, I need to manually generate the gauge RR table below:

After that, I use combined data table feature on the measurement source table to export the gauge RR tables for the selected variables.

The issue is that I have hundreds of variables and for each variable it takes up to maybe three minutes to generate the gauge RR table.
This is really time inefficient and I would like to ask if there is a JSL code or other way to generate the gauge R&R table for given tests and export it to excel in more efficient way.

Your help is very much appreciated.

Re: Automating Gauge R&R On JMP for Large Number of Variables

jthi — Thu, 05 Feb 2026 18:28:32 GMT

If I remember correctly these assume you have set your limits to column properties How to Generate Structured Gauge R&R Reports Across Multiple Tests (with Summary Tables) has also link to some other methods.

Re: Automating Gauge R&R On JMP for Large Number of Variables

RA899 — Thu, 05 Feb 2026 18:33:25 GMT

Thanks @jthi This is very helpful. I see in the example it has Site as the X variable, in my case I have in that sequnce, DIB_id, Site, and then Part_id. I assume that code should be like this in my case:

Names Default To Here(1); dt = Open("$SAMPLE_DATA/Semiconductor Capability.jmp"); var = dt << Variability Chart( Y(:NPN1, :PNP1), Model("Main Effect"), X(:Dib_id), X(:SITE), X(:Part_id), Historical Sigma(0), Invisible ); var << "Gauge R&R"n(); wait(0); result_ref = Report(var)[OutlineBox("Gauge R&R")]; wait(0); dt_result = result_ref[TableBox(1)] << Make Combined Data Table; var << close window;

Does that sound right? Thanks a lot!

Re: Automating Gauge R&R On JMP for Large Number of Variables

jthi — Thu, 05 Feb 2026 19:11:04 GMT

Build the variability chart manually once and modify the script as needed. If I remember correctly all of them will go to same X

X(:Dib_id, :Site, :Part_id)

Make sure they are in correct order to get the correct model (also make the required changes to the Model).